Published in: مجله مکانیک سازه های پیشرفته کامپوزیت، دوره: 3، شماره: 1
COI code: JR_MACS-3-1_005
Paper Language: English
How to Download This Paper
For Downloading the Fulltext of CIVILICA papers please visit the orginal Persian Section of website.
Authors On the Study of Mechanical Properties of Aluminum/Nano-Alumina Composites Produced via Powder Injection MoldingHassan Abdoos - Semnan University
Hamid Khorsand - K.N. Toosi University of Technology
Ali-Akbar Yousefi - Iran Polymer and Petrochemical Institute, Tehran, Iran.
Abstract:Powder Injection Molding (PIM) is a precision manufacturing process used for production of advanced composites. Mixing of polymeric binder with metal powders, molding of feedstock, de-binding of brown parts and sintering of green samples are four main steps of this process. In the present study, the compounds containing multi-component binder system and aluminum/ nano-alumina (0-9 wt.%) powders were prepared and used as feedstock. After that, the feed-stocks were injected, de-bound and sintered for producing standard specimens. Finally, the sintered composites were produced with a maximum relative density of 97.7%. Afterward, the hardness, yield and ultimate tensile strength of the nano-composites were evaluated. The results showed that the relative density, hardness and strength of the manufactured composites increased due to the addition of nano-reinforcements. It is demonstrated that the effect of alumina on the density of PIM composites differs from that of conventional powder metallurgy. Scanning Electron Microscope (SEM) reveals that the agglomeration takes place in the sample containing 9 wt.% nano-alumina.
Keywords:Aluminum matrix composite, Nano-reinforcement, Powder injection molding, Mechanical properties
COI code: JR_MACS-3-1_005
how to cite to this paper:If you want to refer to this article in your research, you can easily use the following in the resources and references section:
Abdoos, Hassan; Hamid Khorsand & Ali-Akbar Yousefi, 2016, On the Study of Mechanical Properties of Aluminum/Nano-Alumina Composites Produced via Powder Injection Molding, Mechanics of Advanced Composite Structures 3 (1), https://www.civilica.com/Paper-JR_MACS-JR_MACS-3-1_005.htmlInside the text, wherever referred to or an achievement of this article is mentioned, after mentioning the article, inside the parental, the following specifications are written.
First Time: (Abdoos, Hassan; Hamid Khorsand & Ali-Akbar Yousefi, 2016)
Second and more: (Abdoos; Khorsand & Yousefi, 2016)
For a complete overview of how to citation please review the following CIVILICA Guide (Citation)
The University/Research Center Information:
Type: state university
Paper No.: 7590
in University Ranking and Scientometrics the Iranian universities and research centers are evaluated based on scientific papers.
Research Info Management
Export Citation info of this paper to research management softwares
New Related Papers
- Experimental and numerical study of delamination detection in a WGF/epoxy composite plate using ultrasonic guided waves and signal processing tools
- Nonlinear vibration analysis of axially moving strings in thermal environment
- Free vibration analysis of variable stiffness composite laminated thin skew plates using IGA
- Influences of temporal evolution of ground motion frequency content on developed dynamic ratcheting in SDOF systems
- Free vibration analysis of multi-cracked micro beams based on Modified Couple Stress Theory
The Above articles are recently indexed in the related subjects
Iran Scientific Advertisment Netword
Share this paper
WHAT IS COI?
COI is a national code dedicated to all Iranian Conference and Journal Papers. the COI of each paper can be verified online.