Flexural Properties of Green Composites made of Latania Naturalfiber and PP/EPDM Composites
Publish place: 4th International Conference on Composites: Characterization, Fabrication, and Application (CCFA-4)
Publish Year: 1393
نوع سند: مقاله کنفرانسی
زبان: English
View: 1,007
متن کامل این Paper منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل Paper (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
COMPOSIT04_108
تاریخ نمایه سازی: 22 مهر 1394
Abstract:
In the present research, for the first time, effects of adding short latania natural fiber into polypropylene (PP) reinforced ethylene propylene diene monomer (EPDM) composites on the flexural behavior of PP/EPDM compositeshave been investigated. The flexural three-point bending test for latania/PP/EPDM composites with different weight percentages of latania natural fiber was conducted. Infusion moulded method was utilized to fabricate standardspecimens. Different weight percentages were considered and the load-deflection diagrams were compared. It was revealed that adding natural fiber could enhance the bending stiffness and ultimate bending strength of PP/EPDMcomposites. The fabrication procedure and testing conditions for the composite specimens were intentionally the same as those mentioned in a recent original article published by journal of reinforced plastics and composites. The resultsobtained by latania natural fiber reinforced PP/EPDM were then compared with those for jute natural fiber reinforced PP/EPDM composites available in the existed literature and the optimized fiber was introduced.
Keywords:
Authors
M Nasihatgozar
Assistant Professor, Department of Mechanical Engineering, Islamic Azad University, Kashan Branch, Kashan, Iran
V Daghigh
Assistant Professor, Department of Mechanical Engineering, Islamic Azad University, Kashan Branch, Kashan, Iran
K Nikbin
Professor, Department of Mechanical Engineering, Imperial College, London, UK