A study on the effects crumb rubber and fiber on the mechanical properties of self-compacting concrete

Publish Year: 1395
نوع سند: مقاله کنفرانسی
زبان: English
View: 567

This Paper With 8 Page And PDF Format Ready To Download

  • Certificate
  • من نویسنده این مقاله هستم

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این Paper:

شناسه ملی سند علمی:

ICCACS01_041

تاریخ نمایه سازی: 25 آذر 1395

Abstract:

Destruction and deterioration of concrete is highly dependent on the formation of cracks and micro-cracks resulted from loading, or environmental influences. Heat and humidity changes in the cement paste form micro-cracks that are concentrated on the surface of coarse grains. As the influence of loading and environmental issues increases, the micro-cracks merge and form cracks that ultimately spread in the concrete body. Using different fibers in the concrete and fabricating fiber concrete is an effective step in preventing the spread of micro-cracks and cracks, and improving the tensile strength.In the present experimental study, the effect of crumb rubber and various metal and glass fibers is investigated on mechanical properties (Compressive strength, tensile strength and modulus of elasticity), rheology (L-BOX, current slump, T50 and funnel V), and the water absorption of self-compacting concrete.To this end, 27 mix designs including mixtures of metal fiber and crumb rubber, glass fiber and crumb rubber, and metal and glass fiber. Metal fibers with 0.1, 0.2, and 0.3% by volume, and glass fibers with 0.1, 0.15, and 0.2% by volume were used. Moreover, crumb rubber was used for volume replacement of sand (0, 4, and 8%). Results show that optimal properties of fiber improve the mechanical properties of self-compacting concrete. Thus, in the mixture containing 0.2% metal fiber tensile strength had increased 29.3% compared to the control sample, due to the fibers’ role in controlling cracks.

Authors

Masih Mohamadi Pour Moghadam

Master oF ScienceConstructionManagement,DepartmentEsfahan(Khorasgan)Branch,slamic Azad university ,Esfahan,iran

Ali Khosh Fetrat

correspond Author,Assitant Profossor,Department of Civil Engineer Esfahan(Khorasgan)Branch,Islamic Azad university.

Ehsan Nekouimehr

Master of science structre, Department Khaje Nasir Toosi ,Tehran, Iran.

مراجع و منابع این Paper:

لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :
  • ACIcommitte 544 Report, "Design Consideration for SFRC", ACI Structural Journal, ...
  • T.R.Naik, S _ S _ S ingh, m. Hossein" abrasion ...
  • ASTM C 33, "Standard Specification for Concrete Aggregates ", Annaul ...
  • نمایش کامل مراجع