COI code: ICICE06_029
Paper Language: English
How to Download This Paper
For Downloading the Fulltext of CIVILICA papers please visit the orginal Persian Section of website.
Authors Numerical Investigation of the Effect of Fuel Preheating on Combustion Process and Emission in a Direct Injection Diesel EngineSamad Jafarmadar - Assistant Prof.- Urmia University
Ramin Barzegar - MSc. Student- Urmia University
Sina Shafee - MSc. Student-Sahand Univ.of Technology
Shahram Khalilarya - Assistant Prof.-Urmia University
Abstract:The effect of fuel preheating on combustion process and emissions in a D.I. diesel engine is investigated using AVL Fire code. Computations are carried out using a three-dimensional model for flows, sprays and combustion in Diesel engines. Four cases for initial fuel temperatures have been studied here as follows:Tfuel =353, 373K as low temperature and Tfuel =473, 523K. It is shown that increasing initial fuel temperature leads to increased atomization of spray and better airfuel mixing. Also, reduced spray penetration due to increased evaporation prevents wall-film formation and considerably decreases soot mass fraction. Mean pressure, temperature, and NOx mass fraction are increased due to improved combustion. The results of model show good agreement with the corresponding data in the literature.
Keywords:DI diesel engine, CFD, Combustion, Emission, Spray, Fuel preheating, wall-film
COI code: ICICE06_029
how to cite to this paper:If you want to refer to this article in your research, you can easily use the following in the resources and references section:
Jafarmadar, Samad; Ramin Barzegar; Sina Shafee & Shahram Khalilarya, 2009, Numerical Investigation of the Effect of Fuel Preheating on Combustion Process and Emission in a Direct Injection Diesel Engine, 06th International Conference on Internal Combustion Engines, تهران, شركت تحقيق، طراحي و توليد موتور ايران خودرو, https://www.civilica.com/Paper-ICICE06-ICICE06_029.htmlInside the text, wherever referred to or an achievement of this article is mentioned, after mentioning the article, inside the parental, the following specifications are written.
First Time: (Jafarmadar, Samad; Ramin Barzegar; Sina Shafee & Shahram Khalilarya, 2009)
Second and more: (Jafarmadar; Barzegar; Shafee & Khalilarya, 2009)
For a complete overview of how to citation please review the following CIVILICA Guide (Citation)
The University/Research Center Information:
Type: state university
Paper No.: 11535
in University Ranking and Scientometrics the Iranian universities and research centers are evaluated based on scientific papers.
Research Info Management
Export Citation info of this paper to research management softwares
New Related Papers
- The effect of detonation energy and gap size on explosive welding: experimental and simulation
- Simulation of Al-Cu explosive welding process: the effect of detonation, collision velocity on mechanical characteristics
- Moving Ball Destination Prediction using Artificial Neural Network for Soccer Robots
- An overview of Micro Grippers used in Micro-Nano-Mechanical Systems and comparing the Results in Medical Applications
- Experimental Study of Residual Stress on TIG Welding of Ck45 Sheet by Contour Method
The Above articles are recently indexed in the related subjects
Iran Scientific Advertisment Netword
Share this paper
WHAT IS COI?
COI is a national code dedicated to all Iranian Conference and Journal Papers. the COI of each paper can be verified online.