Design and Evaluation of Feasibility Study of Friction Stir Welding of Thermoplastic Polypropylene Sheets
Publish Year: 1388
نوع سند: مقاله کنفرانسی
زبان: English
View: 2,237
This Paper With 5 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICME10_370
تاریخ نمایه سازی: 29 آبان 1388
Abstract:
The feasibility of friction stir welding has been studied on polypropylene sheets. The experiments have been designed with taguchi method. The joint strength has been analyzed based on three parameters of translation speed, rotation speed and geometry of the tool. The optimum welding condition has been determined through a statistical analysis. It has been demonstrated that tool geometry has an important role in the seam brittleness due to the material flow during welding.
Keywords:
Friction stir welding – Polypropylene Sheets – Optimum condition
Authors
S Saeedy
M.S. Student, Faculty of engineering, department of mechanical engineering, university of Tehran
M Besharati Givi
Associate Professor, Department of mechanical engineering, university of Tehran
N Sadeghian
Ph.D. Student, Department of mechanical engineering, university of Tehran
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :