Heat Treatment of a (Ti,Hf)-Rich NiTiHf High Temperature Shape Memory Alloy

Publish Year: 1390
نوع سند: مقاله کنفرانسی
زبان: English
View: 968

This Paper With 5 Page And PDF Format Ready To Download

  • Certificate
  • من نویسنده این مقاله هستم

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این Paper:

شناسه ملی سند علمی:

ICME12_020

تاریخ نمایه سازی: 25 شهریور 1392

Abstract:

NiTiHf alloys are known as one of the most promising groups of shape memory alloys for operating at temperatures above 100 ºC. In this paper, effect of intermediate aging on the microstructure, transformation temperatures, and one-way shape memory behavior of a Ni49Ti36Hf15 alloy was investigated. For this purpose, an ingot was fabricated using vacuum induction melting of high purity Ni, Ti, and Hf precursors. The alloy was then homogenized at 1000 ºC, hot-rolled at 850 ºC, and solution treated at 1000 ºC, respectively, to be prepared for aging treatment. Aging treatment was carried out at 500 ºC and 600 ºC for 2h. OM, SEM, XRD, DSC, and the so-called bending test were used to characterize the alloy. Results demonstrated that microstructure of the aged Ni49Ti36Hf15 is composed of B19’ martensitic matrix, (Ti,Hf)2Ni second phase mostly at grain boundary regions, and a new phase, while an approximately 25 ºC decrease in transformation temperatures was observed after aging. It was also found that this heat treatment cannot provide better shape memory properties for the alloy. That aging provided no improvement was correlated to the microstructure of the alloy.

Authors

M Moshref-Javadi

School of Materials & Metallurgical Engineering, Iran University of Science & Technology, Tehran, Iran

M Belbasi

School of Materials & Metallurgical Engineering, Iran University of Science & Technology, Tehran, Iran

S. H. Seyedein

School of Materials & Metallurgical Engineering, Iran University of Science & Technology, Tehran, Iran

M. T. Salehi

School of Materials & Metallurgical Engineering, Iran University of Science & Technology, Tehran, Iran

مراجع و منابع این Paper:

لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :
  • Iternational Conference on Manufacturing Engineering ICME2011, Tehran, Iran ...
  • Memory Alloy", Intermetallics, Vol. 16, No. 5, pp. 698-705, 2008. ...
  • T hermomechan cal Treated NiTi Alloy at A+10FC", Materials and ...
  • A. M. Sandu, K. Tsuchiya, S. Yamamoto, Y. Todaka, and ...
  • W. Cai and K. Otsuka, "Martensite Aging Effect and Thermal ...
  • AS TM-F2004-05 _ "Standard Test Method for Transformation Temperature of ...
  • P. E. Thoma and J. J. Boehm, «Effect of Composition ...
  • Z. Pu, H. Tseng, and K. Wu, "An Innovative System ...
  • P. L. Potapov, A. V. Shelyakov, A. A. Gulyaev, E. ...
  • J. Frenzel, Z. Zhang, K. Neuking, and G. Eggeler, "High ...
  • _ _ ، _ gh-Temperature Shape Memory Alloys Some Recent ...
  • S. Shimizu, Y. Xu, E. Okunishi, S. Tanaka, K. Otsuka, ...
  • نمایش کامل مراجع