Present: ارايه پوستري
COI code: ICSAU05_0201
Paper Language: English
How to Download This Paper
For Downloading the Fulltext of CIVILICA papers please visit the orginal Persian Section of website.
Authors An investigation into the effect of stiffness and link beam connection on coupled steel shear wallArman Zare Mirabadi - M.Sc. in Structural Engineering, Tabriz university, Iran,
Hedayat Veladi - faculty of Civil Engineering Department, Tabriz university, Iran,
Peiman Ghaderi - M.Sc. in Structural Engineering, Islamic Azad university of Mahabad,
Abstract:Coupled shear wall system has been highly considered in recent years. Due to architectural limitations,sometimes the architect is forced to use two spans separate from shear wall. The study results have shown that using coupled shear wall will have better results than single wall in structure behavior and the desired performance can be achieved by using thinner plates. On the other hand, parameters like stiffness of the peripheral elements, the conditions of the link beam, plate dimensions, and so on directly affect this system’s behavior. In order to model steel plates, various elements were examined in software of different references that finally stated that inclined strips model could best simulate the behavior of this system. In order to carry out the study, highly important and average height structures were modelled in SAP2000 software, and pushover analysis was used to study the effects of link beam and the peripheral elements on the system’s nonlinear behavior. In so doing, different models were proposed, and the effects of variables such as connection stiffness, link beam length, link beam stiffness, steel wall opening dimensions, and so on were examined. Finally, it was figured out that stiffening the link beam led to an increase in stiffness and a decrease in displacement of stories, and stiff link beam caused a better behavior in the structure. Moreover, comparing elastic stiffness showed that when the height of a structure increased about 30%, elastic stiffness of such structures decreased about 20%.
Keywords:coupled steel shear wall, link beam, stiffness, pushover analysis, nonlinear behavior
COI code: ICSAU05_0201
how to cite to this paper:If you want to refer to this article in your research, you can easily use the following in the resources and references section:
Zare Mirabadi, Arman; Hedayat Veladi & Peiman Ghaderi, 2017, An investigation into the effect of stiffness and link beam connection on coupled steel shear wall, 5th international congress of structure, architecture and urban development, تهران, دبيرخانه دايمي كنفرانس, https://www.civilica.com/Paper-ICSAU05-ICSAU05_0201.htmlInside the text, wherever referred to or an achievement of this article is mentioned, after mentioning the article, inside the parental, the following specifications are written.
First Time: (Zare Mirabadi, Arman; Hedayat Veladi & Peiman Ghaderi, 2017)
Second and more: (Zare Mirabadi; Veladi & Ghaderi, 2017)
For a complete overview of how to citation please review the following CIVILICA Guide (Citation)
Research Info Management
Export Citation info of this paper to research management softwares
New Related Papers
- Experiments on the arrangement and location of sacrificial piles to reduce erosion around spur dikes
- Experiments on Scour around Inclined Circular and Rectangular With Semi Circular Nose Piers
- The used of artificial neural network for prediction of soil behavior
- Pilot-Scale Studies of Combined Clarification, Filtration,and Ultraviolet Radiation Systems for Disinfection ofSecondary Municipal Wastewater Effluent
- Towards Sustainability By Photovoltaic Energy Saver Panels
The Above articles are recently indexed in the related subjects
Iran Scientific Advertisment Netword
Share this paper
WHAT IS COI?
COI is a national code dedicated to all Iranian Conference and Journal Papers. the COI of each paper can be verified online.