CIVILICA We Respect the Science
Publisher of Iranian Journals and Conference Proceedings
Paper
title

Investigating the Causes of Wastes in Cam Bearing Part of Tiba Produced by Die Casting and Using the SPC and DOE Method to Reduce Them

Credit to Download: 0 | Page Numbers 1 | Abstract Views: 61
Year: 2018
COI code: IIAC05_042
Paper Language: English

How to Download This Paper

For Downloading the Fulltext of CIVILICA papers please visit the orginal Persian Section of website.

Authors Investigating the Causes of Wastes in Cam Bearing Part of Tiba Produced by Die Casting and Using the SPC and DOE Method to Reduce Them

  Hasan Akbari - Production unit of EGC, Bu Ali Sina, Hamadan, P.O. Box: 6517838695, Iran
Amin Nankali - Production unit of EGC, Bu Ali Sina, Hamadan, P.O. Box: 6517838695, Iran
Mehdi Garousi - Production unit of EGC, Bu Ali Sina, Hamadan, P.O. Box: 6517838695, Iran

Abstract:

The purpose of this study is to investigate the causes of waste products in cam bearing part of Tiba produced by die casting method. The effective parameters on production were obtained by the SPC method. In order to achieve the desired result and reduce the percentage of waste products, the DOE method was used. Also, solutions are proposed to reduce each item to achieve optimal production conditions and low waste percentages. The results show that the main causes of increase in the percentage of waste products are warping and different types of porosities. This porosity is a combination of gaseous and shrinkage porosity that can be controlled by decreasing the velocity of Slow Shot and increasing the pressure of intensification phase. On the other hand, the machining process is another major cause of waste in productions, which in this paper some solutions are also presented to reduce it. Some factors such as mold and melting problems are introduced as effective parameters in the waste of part as well.

Keywords:

High pressure die casting, Porosity, SPC, Waste percentage, DOE

Perma Link

https://www.civilica.com/Paper-IIAC05-IIAC05_042.html
COI code: IIAC05_042

how to cite to this paper:

If you want to refer to this article in your research, you can easily use the following in the resources and references section:
Akbari, Hasan; Amin Nankali & Mehdi Garousi, 2018, Investigating the Causes of Wastes in Cam Bearing Part of Tiba Produced by Die Casting and Using the SPC and DOE Method to Reduce Them, 5th Iran International Aluminium Conference 2018 (IIAC2018), تهران -هتل المپيك, مركز تحقيقات آلومينيوم ايران -سازمان توسعه و نوسازي معادن و صنايع معدني ايران (ايميدرو), https://www.civilica.com/Paper-IIAC05-IIAC05_042.htmlInside the text, wherever referred to or an achievement of this article is mentioned, after mentioning the article, inside the parental, the following specifications are written.
First Time: (Akbari, Hasan; Amin Nankali & Mehdi Garousi, 2018)
Second and more: (Akbari; Nankali & Garousi, 2018)
For a complete overview of how to citation please review the following CIVILICA Guide (Citation)

Research Info Management

Export Citation info of this paper to research management softwares

New Related Papers

Iran Scientific Advertisment Netword

Share this paper

WHAT IS COI?

COI is a national code dedicated to all Iranian Conference and Journal Papers. the COI of each paper can be verified online.