Experimental Investigation of the Process Parameters Effect on Morphological Properties of Electrospun Chitosan Coating on AZ31 Magesium Alloy

Electrospinning is a novel surface treatment method that fabricates porous and interconnected nanostructure surface and have high dependency on the process parameters. This paper focuses on working and solution parameters affecting the surface morphology of chitosan nanofiber coating on magnesium AZ31 alloy. For this purpose, in cooperation of Dichloromethane (DCM) Co-solvent, applied voltage, and feed rate at constant tip to magnesium AZ31 alloy substrate at surface morphology of nanofibrous chitosan coating were investigated. The results showed that, DCM Cosolvent, stabilize the electrospinning jet and fabricated the more uniform fibers. Also, in order to produce a chitosan coating with beadles and uniform nanofiber, the applied voltage and feed rate need to be investigated

Keywords:

Electrospinning , Chitosan , Nanofiber coating , Process parameter , AZ31 magnesium alloy

Authors

Mohammadreza Rahimi

M.Sc. Student, School of Metallurgy and Materials Engineering, College of Engineering, University of Tehran, P.O. Box: ۱۱۱۵۵-۴۵۶۳, Tehran, Iran.

Rouhollah Mehdinavaz Aghdam

Assistance Professor, School of Metallurgy and Materials Engineering, College of Engineering, University of Tehran, P.O. Box: ۱۱۱۵۵-۴۵۶۳, Tehran, Iran.

Maryam Ettelaei

M.Sc. Student, School of Metallurgy and Materials Engineering, College of Engineering, University of Tehran, P.O. Box: ۱۱۱۵۵-۴۵۶۳, Tehran, Iran.

Mahmoud Heydarzadeh Sohi

Professor, School of Metallurgy and Materials Engineering, College of Engineering, University of Tehran, P.O. Box: ۱۱۱۵۵-۴۵۶۳, Tehran, Iran

Certificate
من نویسنده این مقاله هستم

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این Paper:

https://civilica.com/doc/963877

شناسه ملی سند علمی:

IMES13_325

تاریخ نمایه سازی: 13 آبان 1398

How to Cite to This Paper:

If you want to refer to this Paper in your research work, you can simply use the following phrase in the resources section:

Rahimi, Mohammadreza and Mehdinavaz Aghdam, Rouhollah and Ettelaei, Maryam and Heydarzadeh Sohi, Mahmoud,1398,Experimental Investigation of the Process Parameters Effect on Morphological Properties of Electrospun Chitosan Coating on AZ31 Magesium Alloy,8th International Conferenece and Exhibition on Materials Engineering and Metallurg,Tehran,https://civilica.com/doc/963877

Scientometrics

The specifications of the publisher center of this Paper are as follows:

Ranking of University of Tehran

Type of center: دانشگاه دولتی

Paper count: 100,912

In the scientometrics section of CIVILICA, you can see the scientific ranking of the Iranian academic and research centers based on the statistics of indexed articles.