Glycidyl Methacrylate/Styrene Melt Grafting onto Polypropylene by Co-Rotating Twin Screw Extruder

Publish Year: 1393
نوع سند: مقاله کنفرانسی
زبان: English
View: 518

متن کامل این Paper منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل Paper (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.

  • Certificate
  • من نویسنده این مقاله هستم

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این Paper:

شناسه ملی سند علمی:

ISPST11_713

تاریخ نمایه سازی: 6 اردیبهشت 1396

Abstract:

In this study, styrene as a reactive comonomer, dicumyl peroxide (DCP) as an initiator and monomer glycidyl methacrylate (GMA) as a modifier were used to investigate the melt free radical grafting of the GMA onto polypropylene (PP) in a co-rotating twin screw extruder. The characteristics of the GMA-grafted samples in the presence and absence of styrene, different styrene concentrations, different GMA concentrations and different DCP concentrations were examined and compared in terms of the grafting degree using titration/back-titration technique and Fourier transform infrared spectroscopy (FTIR). In the absence of the styrene, GMA-grafting levels were found to be low and high DCP concentrations were required to achieve the higher grafting degrees. Concomitantly, grafting degrees increased with increasing DCP concentrations because of enhanced chain scission. Presence of a small amount of styrene causes a significant increase in the grafting degree. It was shown when the styrene concentration was taken equal to the GMA concentration, where the grafting degree was highest.

Authors

Amir Rostami

Department of Polymer Engineering, Amirkabir University of Technology, Mahshahr campus-Mahshahr-Iran

Mohammad Reza Maleki Sede

Department of Polymer Engineering, Amirkabir University of Technology, Mahshahr campus-Mahshahr-Iran

Hamid Garmabi

Department of Polymer Engineering and Color Technology, Amirkabir University of Technology-Tehran-Iran

مراجع و منابع این Paper:

لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :
  • Moad G., Prog. Polym. Sci, 24, 81-142, 1999. ...
  • Brown S.B., Xanthos M., Munich Ed., 75-199, 1992. ...
  • Torres N., Robin J.J., B. Bouterin, J. Appl. Polym. Sci., ...
  • Chandranup P., Bhattacharya S.N., J. Appl. Polym. Sci., 78, 2405, ...
  • Saeb M.R., Garmabi H., J. Appl. Polym. Sci., 111, 1600-1605, ...
  • نمایش کامل مراجع