DIFFUSION AND REACTION WITHIN A SHAPED NICKEL PEROVSKITE CATALYST
Publish place: International Journal of Industrial Engineering & Production Research، Vol: 19، Issue: 3
Publish Year: 1387
نوع سند: مقاله ژورنالی
زبان: English
View: 647
This Paper With 10 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJIEPR-19-3_002
تاریخ نمایه سازی: 7 شهریور 1393
Abstract:
In this study, we prepared a LaNi0.3Al0.7O3 perovskite catalyst using a sol-gel related method (with prop ionic acid as a solvent) for use in the methane dry reforming reaction to produce synthesis gas. We defined the catalyst structure on the basis of Xray diffraction analysis and measurements of the specific surface area and particle size distribution. The mixed oxide structure was shaped into a cylindrical pellet before being measured for its mechanical strength. the shaped perovskite catalyst was then tested in the methane dry reforming reaction to produce synthesis gas at atmospheric pressure. The results are compared with the predictions of a mathematical model that is used to estimate the concentration profile within the pellet. The outlet concentration of thereactants and conversion products calculated by the mathematical model has been consistent with the results obtained by experiments conducted in a fixed bed reactor.
Keywords:
Authors
Matin Parvari
Chemical Engineering College, Iran University of Science and Technology
Peyman Moradi
Chemical Engineering College, Iran University of Science and Technology