CFD simulation of electro-Fenton process
Publish Year: 1396
نوع سند: مقاله کنفرانسی
زبان: English
View: 609
This Paper With 6 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
NCFDACCI08_018
تاریخ نمایه سازی: 29 مهر 1396
Abstract:
The important parameters in mineralization treatment of Petrochemical wastewater by electro-Fenton process were successfully simulated by Computational Fluid Dynamics (CFD). The effects of H2O2/ Petrochemical wastewater (PW) (mL/L), H2O2/Fe2+ molar ratio, current density, pH and reaction time were numerically investigated. Material distribution in the electrochemical cell was studied. Furthermore, the results were compared with the experimental data. The simulated data showed that maximum COD removal was around 67.55% at H2O2/PW (mL/L) of 1.23, H2O2/Fe2+ molar ratio of 3.65, pH of 2.67, current density of 59.7 mA/cm2 and reaction time of 73.19 min while the experimental data obtained from the literature showed a maximum COD removal 66.85% for the same operating conditions. The simulated data showed very good agreement with the experimental data
Keywords:
Authors
Arsalan Parvareh
Department of Chemical Engineering, Faculty of Engineering, Boroujerd Branch, Islamic Azad University, Boroujerd, Iran
Hamid Reza Pirhadi
Department of Chemical Engineering, Faculty of Engineering, Boroujerd Branch, Islamic Azad University, Boroujerd, Iran
Mohammad Fallahi Yekta
Department of Chemical Engineering, Faculty of Engineering, Boroujerd Branch, Islamic Azad University, Boroujerd, Iran