Semi-elliptical crack with different positions in the pipe

Publish Year: 1398
نوع سند: مقاله کنفرانسی
زبان: English
View: 350

This Paper With 11 Page And PDF and WORD Format Ready To Download

  • Certificate
  • من نویسنده این مقاله هستم

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این Paper:

شناسه ملی سند علمی:

OGPH04_049

تاریخ نمایه سازی: 15 بهمن 1398

Abstract:

since the creation of the simplest tools, man has faced the phenomenon of failure in bodies, and because of the advancement of technology in the new age, this issue is more important than the past. Since fracture in the past decades has led to the failure and destruction of many structures, including spacecraft and airplanes, and so on, resulting in many economic and financial losses, the need for more attention to mechanical Proof of failure. Therefore, the analysis of such a failure, in particular for structures that are very sensitive and accurate, is inevitable. Calculation of the stress intensity factor (SIF) for safety used in various structures such as water transfer pipes, oil and gas transmission pipes, etc. is a very important topic. In the present research, the SIFs for pipe with a thickness ratio (outer diameter of cylinder/wall thickness) of 5, 7.5 (thick-walled), 15, 20 (thin-walled) and 10 with circumferential and longitudinal semi-elliptical cracks in the internal and external surfaces of pipe investigated using ABAQUS software in three aspect ratios of 0.2, 0.4, 1 and at three relative depths were 0.2, 0.5 and 0.8 respectively. The results showed that in the fixed aspect ratio, increasing the relative depth of the SIFN increased, and at a constant relative depth, the SIFN decreased with increasing aspect ratio.

Authors

N Habibi

Mechanical Engineering Department, University of Kurdistan

S Mohammadi

Mechanical Engineering Department, University of Kurdistan