Modeling the Separation Unit of Waste Tire Pyrolysis Plant with Aspen HYSYS Software

Among the issues modern society, the environmental pollution is of particular importance. The reducing environmental problems, preventing energy loss and economic saving, need to recycle waste in human life. Pyrolysis is an effective process for the recycling of waste tires. This modeling of scrap tires entered the pyrolysis reactor at 530°C and pressure of 20 kPa, conversion to carbonaceous solids, liquid hydrocarbons and non-condensable gases. This paper presents result of the gasification and separation them using simulation of Aspen HYSYS software.

Keywords:

Waste tire recycling , Environment , Pyrolysis , Char gasification , Aspen HYSYS software

Authors

Seyedeh Masoumeh Najafian

M.sc Student of HSE Engineering, Petroleum University of Technology, Abadan, Iran

Certificate
من نویسنده این مقاله هستم

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این Paper:

https://civilica.com/doc/1025733

شناسه ملی سند علمی:

CECAUD01_038

تاریخ نمایه سازی: 11 تیر 1399

How to Cite to This Paper:

If you want to refer to this Paper in your research work, you can simply use the following phrase in the resources section:

Najafian, Seyedeh Masoumeh,1399,Modeling the Separation Unit of Waste Tire Pyrolysis Plant with Aspen HYSYS Software,Conference on Environment, Civil Engineering, Architecture and Urban Development,https://civilica.com/doc/1025733

Scientometrics

The specifications of the publisher center of this Paper are as follows:

Ranking of Petroleum University of Technology

Type of center: دانشگاه دولتی

Paper count: 2,454

In the scientometrics section of CIVILICA, you can see the scientific ranking of the Iranian academic and research centers based on the statistics of indexed articles.

مقالات مرتبط جدید