Effects of reinforcement distribution on the mechanical properties of Al–Fe3O4 nanocomposites fabricated via accumulative roll bonding
Publish place: Mechanics of Advanced Composite Structures، Vol: 5، Issue: 2
Publish Year: 1397
نوع سند: مقاله ژورنالی
زبان: English
View: 257
This Paper With 9 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_MACS-5-2_003
تاریخ نمایه سازی: 14 تیر 1399
Abstract:
This research developed new nanostructured Al–Fe3O4 composites via accumulative roll bonding (ARB). X-ray diffraction (XRD) analysis and field emission scanning electron microscopy were conducted to examine microstructural characteristics and particle distribution in the nanocomposites. Hardness and tensile strength tests were employed to examine their mechanical properties. After eight cycles of XRD analysis, the size of the Al crystals in the nanocomposites reached 198 nm. After eight cycles of tests on mechanical properties, the Al crystals exhibited a tensile strength and a hardness of 204 MPa and 63 HV, respectively. These values are higher than those achieved by pure Al. The depth of nanocomposite rupture observed in fractographic analysis revealed that a ductile fracture occurred in the materials because of the formation and growth of cavities.
Keywords:
Authors
Behrooz Pirouzi
Dep. of Nanotechnology, Nano materials group, Semnan university
Ehsan Borhani
Semnan University
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :