Studies on mechanical properties of isoro fibers mixed with calcium corbanate reinforced with polypropylene
Publish place: Asian Journal of Green Chmistry، Vol: 4، Issue: 1
Publish Year: 1399
نوع سند: مقاله ژورنالی
زبان: English
View: 269
This Paper With 9 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_AJGC-4-1_008
تاریخ نمایه سازی: 1 مرداد 1399
Abstract:
The aim of this study is to investigate the effectiveness of isora fibre mixed with 1% calcium carbonate (CaCO3) as reinforcement for polypropylene (PP) thermoplastic matrix. Isora fibers were subjected to mercerization prior to blending with PP in order to obtain good interfacial adhesion with the matrix. A PP/isora composite has been prepared by melt blending of PP with 5%, 10%, 15%, 20% alkali treated Isora fibre in co-rotating twin screw extruder. The extruded strands are pelletized and then injection moulded to obtain specimens. The optimum compositions of the PP/alkali treated isora composites were mixed with 1% CaCO3. Fibre-matrix adhesion will be analysed by mechanical and thermal properties of the composites were evaluated.
Keywords:
Authors
Santhoskumar A. Umapathi
Department of Chemical Engineering, Dr. MGR Educational & Research Institute University, Madhuravoyal, Chennai-۹۵
Jaya Chitra Natarajan
Department of Chemical Engineering, Dr. MGR Educational & Research Institute University, Madhuravoyal, Chennai-۹۵
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :