Experimental and Theoretical Investigation of Gelation Time of Nanostructured Polymer Gels by Central Composite Approach
Publish Year: 1399
نوع سند: مقاله ژورنالی
زبان: English
View: 567
This Paper With 12 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJOGST-9-2_005
تاریخ نمایه سازی: 7 مرداد 1399
Abstract:
Currently available polymers as a component of in-situ gels are unsuitable for treating high-temperature/high-salinity reservoirs due to their chemical and thermal degradation. In this study, a new copolymer-based gel system including high molecular weight nanostructured polymers (NSPs) was developed to address the excessive water production problem in reservoirs under harsh conditions. The stability of conventional polymer systems and NSPs was investigated under conditions of 40 days aging at 87000 ppm salinity and 90 °C. Then, gelation time optimization of gel systems composed of NSPs and chromium (III) acetate was performed with regards to the effect of copolymer concentration and copolymer/cross-linker ratio and their interactions during the gelation time. The central composite approach was used to design experiments and build a mathematical model. The analysis of variance (ANOVA) was used to estimate the deviation of the model predictions from the data. The results of stability analysis demonstrated the advantages of NSPs over conventional polymers by a viscosity reduction of 69, 36, and 18% for Flopaam3310, AN105, and NSPs respectively. The model developed for the prediction of gelation time of NSPs gel was significant at a confidence level of 98.6% against the test data. Moreover, it was found that gelation time became longer with a decrease in copolymer concentrations and/or increase in copolymer/cross-linker ratio.
Keywords:
Authors
Mohsen Seidmohammadi
Ph.D. Candidate, Faculty of Petroleum and Natural Gas Engineering, Sahand University of Technology, Sahand New Town, Tabriz, Iran
Eghbal Sahraei
Associate Professor, Faculty of Petroleum and Natural Gas Engineering, Sahand University of Technology, Sahand New Town, Tabriz, Iran
Behrouz Bayati
Assistant Professor, Department of Chemical Engineering, Ilam University, Ilam, Iran
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :