Coating of Ni/γ-Al2O3 on the SUS 304 stainless steel substrate by electrophoretic deposition method
Publish Year: 1399
نوع سند: مقاله کنفرانسی
زبان: English
View: 508
This Paper With 6 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
IRCCE07_121
تاریخ نمایه سازی: 3 شهریور 1399
Abstract:
Ni/ γ-Al2O3 catalytic layer was coated on a stainless steel (SUS 304) substrate by electrophoretic deposition Method. In this research, the influence of solvent on creating a uniform catalytic layer, voltage effect on porosity of the formed layer and time deposition impact on thickness of the deposited layer was studied. The morphology and porosity were characterized by scanning electron microscope (SEM), uniformity was detected by an optical microscope and thickness was measured by a film thickness measuring machine. The obtained results showed that methanol is an appropriate solvent to form a uniform layer on the stainless steel substrate, the high porous catalytic layers are accessible at high voltages and thickness of the deposited layer increases by increment in time deposition.
Keywords:
Authors
Fatemeh Heshmatifar
School of Chemical Engineering, College of Engineering , University of Tehran, Tehran, Iran
Javad Karimi-Sabet
Material and Nuclear Fuel research School, Nuclear Science and Technology Research Institute, Tehran, Iran
Parisa Khadiv-Parsi
School of Chemical Engineering, College of Engineering , University of Tehran, Tehran, Iran