The Effect of Ridges to Improve Ductility and Reduce Deformation Energy in Deep-Drawing Process
Publish place: The Iranian Journal of Materials Forming، Vol: 7، Issue: 2
Publish Year: 1399
نوع سند: مقاله ژورنالی
زبان: English
View: 206
This Paper With 12 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJMF-7-2_005
تاریخ نمایه سازی: 18 فروردین 1400
Abstract:
In this research, two new methods that improve the drawing depth of deep-drawing processes have been introduced. In the first technique, by creating ridges on the punch surface, the stress concentration is decreased on the blank near the punch edge, in turn increasing the drawing depth. The second method is based on the principle of reducing resistant force in the flange area between the die, the blank-holder and the blank that can decrease the required forming energy. By using the ridges on the flange surfaces of die and blank-holder, the contact surface is reduced, which in turn can decrease the force required for blank forming. The simulation results of finite elements are compared to the experimental data. It is found that the ridged punch may delay the blank rupture and significantly raise the drawability.
Keywords:
Authors
Sadra Ranjbaran
Department of Mechanical Engineering, Ferdowsi University of Mashhad, Mashhad, Iran
Mehran Kadkhodayan
Department of Mechanical Engineering, Ferdowsi University of Mashhad, Mashhad, Iran
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :