Effect of Porous Medium Positioning on Heat Transfer of Micro-channel with Jet
Publish Year: 1399
نوع سند: مقاله ژورنالی
زبان: English
View: 284
This Paper With 8 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJE-33-10_023
تاریخ نمایه سازی: 6 اردیبهشت 1400
Abstract:
In this paper, the influence of the locating additive or placing porous-medium film on the heat transfer of a micro-channel by injecting fluid from its lower wall is investigated. The boundary condition slip-walls for the lower and higher walls of the micro-channel and orderly, as insulation and constant temperature is considered, respectively results show that the heat transfer increased with increasing Darcy number and the porous-medium film thickness. The consequences disclosed that the place of the porous-film has a substantial effect on heat transfer. The percentage changes observed for cases such the porous layer in the middle of the micro-channel, near the two upper and lower walls, near the upper wall, near the upper wall and in the form of a rib, along the length of the micro-channel with L /۳ and L/۵ is -۱۴%, ۲.۲۵%, ۵.۴۶%, ۵۵.۵۳%, ۷۰.۵% and ۸۶.۲۷% for nusselt number compared to the porous layer-less state.
Keywords:
Authors
M. Alibeigi
Department of Mechanical Engineering, Arak University of Technology, Arak, Iran
S. D. Farahani
Department of Mechanical Engineering, Arak University of Technology, Arak, Iran
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :