Electrical Resistivity Measurement of the Molten Cordierite Glass Using Two-wire method
Publish place: Advanced Ceramics Progress، Vol: 2، Issue: 1
Publish Year: 1395
نوع سند: مقاله ژورنالی
زبان: English
View: 191
متن کامل این Paper منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل Paper (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_ACERPT-2-1_001
تاریخ نمایه سازی: 11 اردیبهشت 1400
Abstract:
Electrical resistivity (ER) is a main parameter in the melting processes of glasses. However, its measurement is difficult at high temperatures. In this study the electrical resistivity of different cordierite glass samples in the molten state was measured in the temperature range of ۱۱۰۰˚C to ۱۵۵۰ ˚C using the two-wire method. It was attempted to decrease the electrical resistivity of the glass by adding Na۲O to the base glass. In one sample ۰.۵% wt Na۲O was added and in another ۱%. It was observed that the electrical resistivity of the glass decreased as temperature increased. Also, it was found that the electrical resistivity of cordierite glass decreases with the addition of Na۲O. This was attributed to the high mobility of Na ions and mixed alkali effect.
Keywords:
Authors
Farshad Soleimani
Material Engineering, Malayer University
Alireza Aghaei
Ceramic, Materials and Energy Research Center
Mohammad Zakeri
Research Department of Ceramic, Materials and Energy Research Center (MERC)
Mohammad Eshraghi
Semiconductors, Materials and Energy Research Center (MERC)