Hole-flanging of ۲۲۰۵ Dual-Phase Steel using Incremental Forming Process

Publish Year: 1400
نوع سند: مقاله ژورنالی
زبان: English
View: 264

This Paper With 7 Page And PDF Format Ready To Download

  • Certificate
  • من نویسنده این مقاله هستم

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این Paper:

شناسه ملی سند علمی:

JR_ADMTL-14-1_004

تاریخ نمایه سازی: 13 اردیبهشت 1400

Abstract:

In this study, hole-flanging of a dual-phase steel sheet is conducted using incremental forming approach. In this process, a hole with a certain diameter is pre-cut on a sheet. Then, this hole is transformed into a cylindrical flange shapes, by contacting the forming tool with the hole edges. During the process, the tool is moved in spiral paths. The parameters affecting the height and thickness distribution of the formed flange include axial step, radial step, and rotational speed of the tool. Results show that the axial step has the most significant effect on the process, among other parameters; when the axial step is tripled, the flange thickness increases by ۱۹%. On the other hand, a decrease in the radial step decreases the flange edge thickness. When the radial step is tripled, the flange thickness increases by ۸%, while the flange height decreases about ۳%.

Authors

Amir H. Roohi

Department of Mechanical Engineering, Faculty of Industrial and Mechanical Engineering, Qazvin Branch, Islamic Azad University, Qazvin, Iran

Seyed Jalal Hashemi

Department of Mechanical Engineering, Faculty of Enghelab-e Eslami, Tehran Branch, Technical and Vocational University (TVU), Tehran, Iran

مراجع و منابع این Paper:

لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :
  • Edward, L., Apparatus and Process for Incremental Dieless Forming. U.S. ...
  • Khalifa, N. B., Thiery, S., Incremental Sheet Forming with Active ...
  • Cristino, V., Montanari, L., Silva, M., and Martins, P., Towards ...
  • Cui, Z., Gao, L., and Lu, Q. J., Application of ...
  • Cui, Z., Gao, L., Studies on Hole-flanging Process using Multistage ...
  • Centeno, G., Silva, M., Cristino, V., Vallellano, C., and Martins, ...
  • Silva, M., Teixeira, P., Reis, A., and Martins, P., On ...
  • Montanari, L., Cristino, V., Silva, M., and Martins, P., On ...
  • Borrego, M., Morales-Palma, D., Martínez-Donaire, A., Centeno, G., and Vallellano, ...
  • Yang, C., Wen, T., Liu, L. T., Zhang, S., and ...
  • Cristino, V. A. M., Silva, M. B., Wong, P. K., ...
  • Bambach, M., Voswinckel, H., and Hirt, G., A New Process ...
  • Cao, T., Lu, B., Ou, H., Long, H., and Chen, ...
  • Dewang, Y., Purohit, R., and Tenguria, N., A Study on ...
  • Hussain, G., Valaei, H., Al-Ghamdi, K. A., and Khan, B., ...
  • Martínez-Donaire, A., Borrego, M., Morales-Palma, D., Centeno, G., and Vallellano, ...
  • Wu-Rong, W., Chang-Wei, H., Zhong-Hua, Z., and Xi-cheng, W., The ...
  • Tisza, M., Physical Metallurgy for Engineers, 1st Edition, Asm International ...
  • Wen, T., Zhang, S., Huang, Q., and Liu, Q., Bi-Directional ...
  • Bastos, R. N. P., De Sousa, R. J. A., and ...
  • Shafiei, M., Torabian, H., and Shahverdi, H., Numerical and Experimental ...
  • نمایش کامل مراجع