Effect of the Micro Wire-EDM Process Parameters on the Recast Layer in the Molybdenum Micromachining

Publish Year: 1396
نوع سند: مقاله ژورنالی
زبان: English
View: 177

This Paper With 7 Page And PDF Format Ready To Download

  • Certificate
  • من نویسنده این مقاله هستم

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این Paper:

شناسه ملی سند علمی:

JR_ADMTL-10-1_011

تاریخ نمایه سازی: 18 اردیبهشت 1400

Abstract:

The Micro wire electrical discharge machining (Micro wire-EDM) process is a modern machining process with various applications in manufacturing micro-parts. The recast layer remaining on the machined surfaces is an inevitable complication of this process. This layer can subsequently affect the machined parts performance. To optimize the recast layer in the micro wire-EDM of the molybdenum microparts, effect of the process parameters on the distribution amplitude of the recast layer was investigated using the Taguchi method. The obtained results showed that the optimal levels of the micro wire-EDM process parameters for achieving the optimal distribution amplitude of the recast layer are as follows: spark pulse-on time of ۰.۲ μs, cutting speed of ۷ mm/min, process voltage of ۱۷ V, and wire tension of ۰.۴۵ kg. Also the importance order of the effect of the process parameters on the distribution amplitude of recast layer is as follows: spark pulse-on time, process voltage, cutting speed, and wire tension.

Keywords:

Molybdenum , Micromanufacturing , Micromachining , Micro Wire Electrical Discharge Machining , Micro-WEDM , Recast layer

Authors

Mohammad Tahmasebipour

Faculty of New sciences & Technologies, University of Tehran, Tehran, Iran *Corresponding author

Y. Tahmasebipour

Micro/Nano-Manufacturing Technologies Development Laboratory, Faculty of New sciences & Technologies, University of Tehran, Iran

A. Shabani

Micro/Nano-Manufacturing Technologies Development Laboratory, Faculty of New sciences & Technologies, University of Tehran, Iran

M. Boujari Aliabadi

Faculty of New sciences & Technologies, University of Tehran, Tehran, Iran

مراجع و منابع این Paper:

لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :
  • Rupajati, P., Soepangkat, B. O. P., Pramujati, B., and Agustin, ...
  • Newtona, T. R., Melkote, S. N., Watkins, T. R., Trejo, ...
  • Shahali, H., Yazdi, M. R. S., Mohammadi, A., and Iimanian, ...
  • Puri, A. B., Bhattacharyya, B., “Modeling and analysis of white ...
  • Rajesha, S., Jawalkar, C. S., Mishra, R. R., Sharma, A. ...
  • Zhang, Y., Liu, Y., Ji, R., and Cai, B., “Study ...
  • Ekmekci, B., “Residual stresses and white layer in electric discharge ...
  • Chiang, K., Chang, F. P., and Tsai, D. C., “Modeling ...
  • Azam, M., Jahanzaib, M., Abbasi, J. A., Abbas, M., Wasim, ...
  • Mohamed, A. R., Asfana, B., and Ali, M. Y., “Investigation ...
  • نمایش کامل مراجع