The Application of Modal Testing for Non-destructive Material Identification of a Car Seat Frame

Publish Year: 1400
نوع سند: مقاله ژورنالی
زبان: English
View: 294

This Paper With 8 Page And PDF Format Ready To Download

  • Certificate
  • من نویسنده این مقاله هستم

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این Paper:

شناسه ملی سند علمی:

JR_JCAM-52-1_005

تاریخ نمایه سازی: 21 اردیبهشت 1400

Abstract:

Material properties of a structure can be estimated using destructive and non-destructive methods. Experimental vibration data of the structure can be used to conduct a non-destructive procedure to identify material properties. In this research, experimental modal parameters obtained from modal testing are utilized to estimate the Young’s modulus and the density of different components of a car seat frame. To do so, the finite element model of the structure is constructed and the modal parameters are evaluated by performing modal analysis. The obtained modal parameters are then used in an inverse identification procedure and compared with the experimental counterparts to estimate the material properties of the structure in an optimization framework. The objective function is defined by comparing the numerical and experimental natural frequencies where the material properties are considered as the design parameters of the optimization process. To find the optimum design parameters, the response surface optimization technique is employed to alleviate the computational costs of direct optimization. To this end, the design of experiment method using the Box-Behnken design is conducted to create the design points. The kriging method is then utilized to construct the response surfaces. Finally, the nonlinear programming quadratic Lagrangian method is employed to evaluate the best estimations for the material properties using the response surface optimization method.

Authors

Mohammad Sedaghati

Department of Mechanical Engineering, Engineering Faculty, Shahid Chamran University of Ahvaz, Ahvaz, Iran

Laleh Fatahi

Department of Mechanical Engineering, Engineering Faculty, Shahid Chamran University of Ahvaz, Ahvaz, Iran

Shapour Moradi

Department of Mechanical Engineering, Engineering Faculty, Shahid Chamran University of Ahvaz, Ahvaz, Iran

مراجع و منابع این Paper:

لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :
  • J. H. Tam, Z. C. Ong, Z. Ismail, B. C. ...
  • Y. Shi, H. Sol, and H. Hua, Material parameter identification ...
  • J. H. Tam, Z. C. Ong, Z. Ismail, B. C. ...
  • G. F. Gomes, Y. A. D. Mendez, P. da S. ...
  • J. H. Tam, Identification of elastic properties utilizing non-destructive vibrational ...
  • S. Syngellakis and R. Setiawan, Vibration tests and metamodelling for ...
  • J. H. Tam, Z. C. Ong, and K. W. Ho, ...
  • R. Viala, V. Placet, and S. Cogan, Identification of the ...
  • S. L. C. Ferreira et al., Box-Behnken design: an alternative ...
  • J. D. Martin and T. W. Simpson, Use of kriging ...
  • SolidWorks. Dassault Systemes Inc, 2019 ...
  • Ansys, Release 19.0 Theory Guide, ANSYS Inc, 2019 ...
  • K. Schittkowski, NLPQL: A FORTRAN subroutine solving constrained nonlinear programming ...
  • S. Sakata, F. Ashida, and M. Zako, Structural optimization using ...
  • R. J. Allemang and D. L. Brown, A complete review ...
  • نمایش کامل مراجع