Numerical Analysis of the Baffles Inclination on Fluid Behavior ‎in a Shell and Tube Heat Exchanger

Publish Year: 1400
نوع سند: مقاله ژورنالی
زبان: English
View: 179

This Paper With 9 Page And PDF Format Ready To Download

  • Certificate
  • من نویسنده این مقاله هستم

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این Paper:

شناسه ملی سند علمی:

JR_JACM-7-1_030

تاریخ نمایه سازی: 9 خرداد 1400

Abstract:

The thermo-hydraulic performances of the shell-and-tube heat exchangers with different baffles inclination angle α =۱۰°, α =۲۰°, and α = ۴۰° are investigated. The numerical analysis has been evaluated using ANSYS Fluent with the finite volume method for Reynolds number varying between ۲۴۰۰۰ and ۲۷۰۰۰. In all heat exchangers, the characteristics studied are the velocity, the temperature in the shell, the heat transfer coefficient, the pressure. The results showed small dead zones for the baffles inclination angle of ۴۰°. The results showed that the temperature increases by ۳.۴ K, the heat transfer coefficient decreased by ۰.۹۸۳ %, the pressure drop decreased by ۰.۹۹۲ %, the overall performance factor decreased by ۰.۸۳ % when the baffles inclination angle α is increased from ۱۰° to ۴۰°.

Keywords:

Shell and tube heat exchanger , CFD , pressure drop , Baffle design

Authors

Ahmed Youcef

Research Unit for Renewable Energies in the Saharan Region (URERMS), Renewable Energy Development Center (CDER), ۰۱۰۰۰, Adrar, Algeria

Rachid Saim‎

Energetic and Applied Thermal Laboratory (E.T.A.P), Faculty of Technology, Abou Bekr Belkaid University, P. Box ۲۳۰, Tlemcen, Algeria‎

مراجع و منابع این Paper:

لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :
  • Master, B. I., Chunangad, K. S., Pushpanathan, V., Fouling mitigation ...
  • Li, H., Kottke, V.,Analysis of local shell side heat and ...
  • Wang, Q., Chen, G., Chen, Q., Zeng, M., Review of ...
  • Li, H., Kottke, V.,Effect of the leakage on pressure drop ...
  • El Maakoul, A., Laknizi, A., Saadeddine, S., El Metoui, M., ...
  • Gabriel, B. L., Tânia, S. K., Ricardo, A. M., Assessment ...
  • Cong, D., Zhou, X.F., Rui, D., You, Q. Z., Ya, ...
  • Sepehr, S., Hassan, H. Multi-objective optimization of shell and tube ...
  • Dogan, E., Thermoeconomic optimization of baffle spacing for shell and ...
  • Kunal, S. K., Farkade, H.S.,Heat transfer analysis of curved baffle ...
  • Sunil, S., Mustansir, H. P.,Comparative thermal performance analysis of segmental ...
  • Youcef, A., Saim, R., Öztop, H., Ali, M., Turbulent forced convection in ...
  • Houari, A., Effect of corrugated baffles on the flow and ...
  • Ahmed, Y., Rachid, S., Comparative numerical study of turbulent forced ...
  • Ahmed, Y., Rachid, S., Computational analysis of turbulent flow and ...
  • Cong, D., Dongshuang, L., Youqu, Z., Guoneng, L., Yange, S., ...
  • Devvrat, V., Aanand, S., Design of shell and tube type ...
  • Kunal, S. K., Farkade, H.S., Heat transfer analysis of curved ...
  • Ender, O., Ilker, T.,Shell side CFD analysis of a small ...
  • نمایش کامل مراجع