Nonlinear Analysis of Colpitts Oscillator using on Differential Transform Method
Publish Year: 1400
نوع سند: مقاله ژورنالی
زبان: English
View: 346
This Paper With 16 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JECEI-9-2_001
تاریخ نمایه سازی: 12 خرداد 1400
Abstract:
Background and Objectives: The Differential transform method (DTM) is used in the analysis of ordinary, partial, and high-order differential equations. Recently, the DTM is used in the nonlinear analysis of physical nonlinear dynamic systems. Methods: The DTM method is used to analyze and analytically solve the nonlinear mathematical model of bias current-controlled Colpitts oscillator with variable coefficients. Intervals of the validity of the proposed method are evaluated by using the fourth order Runge-Kutta method (RK۴M). In this note, the Lyapunov exponent (LE) can be used to analyze the Colpitts oscillator. By using DTM, the LEs are calculated analytically with unknown parameters in a short interval of time t[۰, ۳ Sec]. Results: In this paper, intervals of the validity of the proposed method are evaluated using RK۴M. In addition, LEs are calculated using analytical and numerical methods based on DTM technique and Wolf method, respectively. LEs of the proposed system are presented as a function of the control parameter to confirm the applied technique’s usefulness. Conclusion: By comparing these two methods, the proposed DTM analytical technique is relatively more precise. Simulation results confirmed the impact of different parameters on LEs with two different initial conditions. The results show good accuracy of the DTM in short time intervals t[۰, ۳ Sec].Background and Objectives: The Differential transform method (DTM) is used in the analysis of ordinary, partial, and high-order differential equations. Recently, the DTM is used in the nonlinear analysis of physical nonlinear dynamic systems. Methods: The DTM method is used to analyze and analytically solve the nonlinear mathematical model of bias current-controlled Colpitts oscillator with variable coefficients. Intervals of the validity of the proposed method are evaluated by using the fourth order Runge-Kutta method (RK۴M). In this note, the Lyapunov exponent (LE) can be used to analyze the Colpitts oscillator. By using DTM, the LEs are calculated analytically with unknown parameters in a short interval of time t[۰, ۳ Sec]. Results: In this paper, intervals of the validity of the proposed method are evaluated using RK۴M. In addition, LEs are calculated using analytical and numerical methods based on DTM technique and Wolf method, respectively. LEs of the proposed system are presented as a function of the control parameter to confirm the applied technique’s usefulness. Conclusion: By comparing these two methods, the proposed DTM analytical technique is relatively more precise. Simulation results confirmed the impact of different parameters on LEs with two different initial conditions. The results show good accuracy of the DTM in short time intervals t[۰, ۳ Sec].
Keywords:
Authors
A.R. Ghomi Taheri
Electrical Engineering Department, Engineering Faculty, Islamic Azad University, Arak Branch, Arak, Iran.
F. Setoudeh
Engineering Faculty, Arak University of Technology, Arak, Iran.
M. Tavakoli
Electrical Engineering Department, Engineering Faculty, Islamic Azad University, Arak Branch, Arak, Iran.
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :