Numerical Assessment of Tight-Fit Sleeve Clamp in the Repair Process of Cracked Submarine Pipelines

Publish Year: 1399
نوع سند: مقاله ژورنالی
زبان: English
View: 204

This Paper With 8 Page And PDF Format Ready To Download

  • Certificate
  • من نویسنده این مقاله هستم

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این Paper:

شناسه ملی سند علمی:

JR_IJMTE-14-NaN_002

تاریخ نمایه سازی: 17 خرداد 1400

Abstract:

The present research addresses the crack arrest in the submarine pipeline under internal pressure, axial force, and bending moment. The main purpose of the research is to consider tight-fit sleeves as a solution to crack arrest. The stress intensity factor criteria are used to describe the crack behavior. It should be noted that the cracks examined here are inclined through-thickness cracks, which the ABAQUS commercial software used to simulate them. Itchr('۳۹')s noteworthy that Mode I fracture is dealt with, and the other fracture modes are omitted. The results show that the tight-fit sleeves, preferentially arrest the inclined cracks; so that the amounts of the stress intensity factors decrease for all the cracks except for the circumferential cracks to the extent that they become closed. As a result, their growth stops in practice; however, it best reduces the stress intensity factors by up to ۶۵.۳۶% at the circumferential cracks, and their amounts remain non-negative. Tight-fit sleeves create a pressurized region around the inclined cracks. This causes  that inclined cracks remain closed.

Authors

Seyed Mohammad Hossein Sharifi

Department of Mechanical Engineering, Petroleum University of Technology

Pedram Edalat

Department of Mechanical Engineering, Petroleum University of Technology

Babak Najafi

Iranian Offshore Oil Company (IOOC)

Masoud Bolfakeh

Petroleum University of Technology

مراجع و منابع این Paper:

لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :
  • F. Van den Abeele and M. Di Biagio, "Design of ...
  • M. Ali Ghaffari and H. Hosseini-Toudeshky, "Fatigue Crack Propagation Analysis ...
  • F. Benyahia, A. Albedah, and B. Bachir Bouiadjra, "Stress Intensity ...
  • M. Meriem-Benziane, S. A. Abdul-Wahab, H. Zahloul, B. Babaziane, M. ...
  • A. Achour, A. Albedah, F. Benyahia, B. A. B. Bouiadjra, ...
  • H. Zarrinzadeh, M. Z. Kabir, and A. Deylami, "Experimental and ...
  • G. Rashed, H. Eskandari, and A. Savari, "Investigating the Effectiveness ...
  • T. L. Anderson, Fracture Mechanics: Fundamentals and Applications, ۴th Editio. ...
  • G. D. and T.Seelig, Fracture Mechanics: With an Introduction to ...
  • M. C. Walters, G. H. Paulino, and R. H. Dodds, ...
  • C. F. Shih, B. Moran, and T. Nakamura, "Energy release ...
  • D. Bowness and M. M. K. Lee, "The development of ...
  • C. F. Shih and R. J. Asaro, "Elastic-plastic analysis of ...
  • ABAQUS Version ۶.۱۴-۱, "Dassault Systémes Simulia Corp," Providence, RI. ۲۰۱۴ ...
  • R. S. Barsoum, "On the use of isoparametric finite elements ...
  • J. E. Akin, "The generation of elements with singularities," Int. ...
  • E. E. Gdoutos, Solid mechanics and its applications, ۲nd editio. ...