Optimization of the Nickel Removal Process From Zinc Sulfate Solution Using Central Composite Design of Experiments
Publish place: Iranian Journal of Analytical Chemistry، Vol: 8، Issue: 1
Publish Year: 1400
نوع سند: مقاله ژورنالی
زبان: English
View: 237
This Paper With 12 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJAC-8-1_003
تاریخ نمایه سازی: 23 خرداد 1400
Abstract:
Nickel is one of the metallic impurities that should be removed from the electrolyte solution before the electrowinning of zinc. This study investigated the parameters affecting the process of nickel removal in an Iranian zinc smelter plant by the response surface methodology. According to the results of experiments, the optimum condition for removal of nickel was obtained at temperature of ۸۵ °C, the residence time of ۶۰ minutes, zinc powder of ۲.۵ g/l, mixing speed of ۵۰۰ rpm, and pH of ۵. With regards to the resulting model from the Design-Expert software, the significant parameters were concentration, residence time, and temperature, respectively.
Keywords:
Authors
Pourya Abbasi
Department of Chemical Engineering, University of Mohaghegh Ardabili, Ardabil, Iran
Keyvan Shayesteh
Department of Chemical Engineering, University of Mohaghegh Ardabili, Ardabil, Iran
Vahid Vahidfard
Department of Chemical Engineering, University of Mohaghegh Ardabili, Ardabil, Iran; Innovation Center, Payame Noor University, Iran
Mehdi Hosseini
Department of Chemistry,Faculty of Basic Science, Ayatollah Boroujerdi University, Boroujerd, Iran