ورود
مقالات فارسیISIکنفرانسهاژورنالها

Numerical Analysis of an Edge Crack Isotropic Plate with Void/Inclusions under Different Loading by Implementing XFEM

Publish place: Journal of Applied and Computational Mechanics، Vol: 7، Issue: 3
Publish Year: 1400
نوع سند: مقاله ژورنالی
زبان: English
View: 208

This Paper With 21 Page And PDF Format Ready To Download

  • Certificate
  • من نویسنده این مقاله هستم

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این Paper:
https://civilica.com/doc/1249731

شناسه ملی سند علمی:

JR_JACM-7-3_010

تاریخ نمایه سازی: 12 مرداد 1400

Abstract:

In the present work, the effect of various discontinuities like voids, soft inclusions and hard inclusions of the mixed-mode stress intensity factor (MMSIF), crack growth and energy release rate (ERR) of an edge crack isotropic plate under different loading like tensile, shear, combine and exponential by various numerical examples is investigated. The basic formulation is based on the extended finite element method (XFEM) through the M interaction approach using the level set method. The effect of single and multi voids and inclusions with position variation on MMSIF and crack growth are also investigated. The presented results would be applicable to enhancing the better fracture resistance of cracked structures and various loading conditions.

Keywords:

XFEM , MMSIF , Void/Inclusion , Edge Crack , Crack Propagation , ERR

Authors

Achchhe Lal

Department of Mechanical Engineering, S. V. National Institute of Technology, Surat-۳۹۵۰۰۷, India

Manoj B. Vaghela

Department of Mechanical Engineering, S. V. National Institute of Technology, Surat-۳۹۵۰۰۷, India

Kundan Mishra

Department of Mechanical Engineering, S. V. National Institute of Technology, Surat-۳۹۵۰۰۷, India

مراجع و منابع این Paper:

لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :
  • G. C. Sih, Energy-density concept in fracture mechanics, Engineering Fracture ...
  • J. S. Ke and H. W. Liu, The measurements of ...
  • W. Z. Chien, Z. C. Xie, Q. L. Gu, Z. ...
  • T. Belytschko, H. Chen, J. Xu, and G. Zi, Dynamic ...
  • N. Sukumar and J.H. Prevost, Modelling quasi-static crack growth with ...
  • J. Bellec andJ.E. Dolbow, A note on enrichment functions for ...
  • T. Belytschko, R. Gracie and G.A. Ventura, A review of ...
  • A. Asadpoure, S. Mohammadi and A. Vafaia, Modelling crack in ...
  • Z. LI and Q. Chen, Crack- inclusion interaction for mode ...
  • S.E. Mousavi and N. Sukumar, Generalized Gaussian quadrature rules for ...
  • S. Kumar, I.V. Singh, B.K. Mishra and A. Singh, New ...
  • T. Belytschko and R. Gracie, XFEM applications to dislocations and ...
  • N. Sukumar, D.L. Chop, N. Moes and T. Belytscko, Modelling ...
  • W. Limtrakarn and P. Dechaumphai, Adaptive finite element method to ...
  • S. Jiang, C. Du, and C. Gu, An investigation into ...
  • S. Natarajan, P. Kerfriden, D. R. Mahapatra and S. P. ...
  • Crack Interaction Studies Using XFEM Technique [مقاله ژورنالی]
  • A. S. Shedbale, I. V. Singh and B. K. Mishra, ...
  • J. Grasa, J. A. Bea, J. F. Rodriguez, and M. ...
  • K. Khatri and A. Lal, Stochastic XFEM fracture and crack ...
  • K. Khatri and A. Lal, Stochastic XFEM based fracture behavior ...
  • M.T. Ebrahimi, D. Dini, D.S. Balint, A.P. Sutton, and S. ...
  • K. Huang, L. Guo and H. Yu, Investigation of mixed-mode ...
  • T. Yu and T.Q Bui, Numerical simulation of ۲-D weak ...
  • J. Zhang, Z. Qu, Q. Huang, L. Xie, and C. ...
  • I.V. Singh, B.K. Mishra, S. Bhattacharya, and R.U. Patil, The ...
  • A. Lal, S.P. Palekar, S.B. Mulani and R.K. Kapania, Stochastic ...
  • S. Kumar, I.V. Singh, B.K. Mishra, and T. Rabczuk, Modeling, ...
  • T.Q. Bui and C. Zhang, Extended finite element simulation of ...
  • Z.H. Teng, D.M. Liaoa, S.C. Wu, F. Sun, T. Chen ...
  • Z. Han, D. Weatherley and R. Puscasu, A relationship between ...
  • J. Zhao, Modeling of Crack Growth Using a New Fracture ...
  • X. Sun, G. Chaia and Y. Bao, Nonlinear numerical study ...
  • J.M. Sim and Y.S. Chang, Crack growth evaluation by XFEM ...
  • D. Wilson, Z. Zheng and F.P.E. Dunne, A microstructure-sensitive driving ...
  • M. Surendran, A.L.N. Pramod and S. Natarajan, Evaluation of Fracture ...
  • Z. Sun, X. Zhuang and Y. Zhang, Cracking Elements Method ...
  • M. Francesco Funari, P. Lonetti and S. Spadea, A crack ...
  • J.L. Curiel-Sosa, B. Tafazzolimoghaddam, and C. Zhang, Modelling fracture and ...
  • D. Roberto and L. Ma, Energy Release Rate of Moving ...
  • A.M. Aguirre-Mesa, D. Ramirez-Tamayo, M.J. Garcia, A. Montoya, and H. ...
  • R.U. Patil, B.K. Mishra, and I.V. Singh, A new multiscale ...
  • S.Z. Feng and W. Li, An accurate and efficient algorithm ...
  • S.Z. Feng and X. Han, A novel multi-grid based reanalysis ...
  • T.Q. Bui and C. Zhang, Analysis of generalized dynamic intensity ...
  • X. Zhang and T.Q. Bui, A fictitious crack XFEM with ...
  • Z. Kang, T. Quoc Bui, D. Dinh Nguyen, T. Saitoh, ...
  • Z. Wang, T. Yu, T. Quoc Bui, N. Anh Trinh, ...
  • Z. Kang, T. Quoc Bui, D. Dinh Nguyen and S. ...
  • Z. Kang, T. Quoc Bui, T. Saitoh, and S. Hirose, ...
  • Z. Wang, T. Yu, T. Quoc Bui, S. Tanaka, C. ...
  • Z. Kang, T. Quoc Bui, T. Saitoh and S. Hirose, ...
  • N. Sukumar, D.L. Chopp, N. Moës and T. Belytschko, Modelling ...
  • M. Stolarska, D.L. Chopp, N. Moës and T. Belytschko, Modelling ...
  • S. Mohammadi, Extended Finite Element Method for Fracture Analysis of ...
    • نمایش کامل مراجع