Parisa Naeiji - Faculty of Chemical, gas and petroleum Engineering, Semnan University, Semnan, Iran
Farshad Varaminian - Faculty of Chemical, gas and petroleum Engineering, Semnan University, Semnan, Iran

In this study, a differential scanning calorimetry (DSC) has been used to characterize tetrahydrofuran (THF) hydrate formation with and without the presence of sodium and chloride salts. The thermal properties including the heat of formation, phase change temperature and specific heat capacity of THF hydrate formation have been determined. When salts are present, THF hydrate is inhibited, so that the phase change temperature shifts to a lower temperature, a broadening of the DSC peak can be seen and the height of the peak and the heat of formation decreases. Because the heat capacity depends on the heat of formation, it reduces when salt is present. The results show that the sodium salt solutions have exhibited the best performance on delaying nucleation of hydrate in order of Na۲SO۳ > NaF > NaCl, while chloride salt solutions, especially CaCl۲, have demonstrated that can reduce the heat of formation to around ۶۵% compared to that of without salt.

Tetrahydrofuran Hydrate, Differential Scanning Calorimetry, Formation Heat, Phase Change Temperature, Specific Heat Capacity