An artificial neural network approach to prediction of surface roughness and material removal rate in CNC turning of C۴۰ steel

The present study is focused to investigate the effect of the various machining input parameters such as cutting speed (vc), feed rate (f), depth of cut, and nose radius (r) on output i.e. surface roughness (Ra and Rq) and metal removal rate (MRR) of the C۴۰ steel by application of an artificial neural network (ANN) method.  ANN is a soft computing tool, widely used to predict, optimize the process parameters. In the ANN tool, with the help of MATLAB, the training of the neural networks has been done to gain the optimum solution. A model was established between the computer numerical control (CNC) turning parameters and experimentally obtained data using ANN and it was observed from the result that the predicted data and measured data are moderately closer, which reveals that the developed model can be successfully applied to predict the surface roughness and material removal rate (MRR) in the turning operation of a C۴۰ steel bar and it was also observed that lower the value of surface roughness (Ra and Rq) is achieved at the cutting speed of ۸۰۰ rpm with a feed rate of ۰.۱ mm/rev, a depth of cut of ۲ mm and a nose radius of ۰.۴ mm.

Keywords:

modelling , artificial neural network (ANN) , turning , surface roughness , MRR.