Potential distribution and sensitivity map in ECT systems based on finite element method
Publish place: 13th National Congress of Mechanical Biosystems Engineering and Mechanization of Iran
Publish Year: 1400
نوع سند: مقاله کنفرانسی
زبان: English
View: 303
This Paper With 20 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
NCAMEM13_041
تاریخ نمایه سازی: 18 آبان 1400
Abstract:
Electrical capacitance tomography (ECT) is a non-invasive measurement technology, which is used to acquire spatial distribution information. It have application in many fields from food industry to oil and gas and especially to biomedical engineering and two-phase measurements. Defining potential distribution and sensitivity map is oneof the primary problems associated to ECT systems. A computational procedure based on FEM is given in this text that could calculate the sensitivity in a short time. All derived equations are applied in a case study circular phantom and potential distribution and sensitivity maps are obtained respectively. The results show the robustness of thederived equations and sketched maps are shown good symmetry in circular medium.
Keywords:
Authors
Hossein Mousazadeh
Associate Prof., Mechanical Engineering of Biosystems, University of Tehran, Iran
Nazila Tarabi
Ph.D. Candidate, Mechanical Engineering of Biosystems, University of Tehran, Iran
Jalil Taghizadeh-Tameh
Ph.D. Candidate, Mechanical Engineering of Biosystems, University of Tehran, Iran
Ali Kiapey
Professional Researcher of Ports and Maritime Organization, Tehran, Iran
Farzad Mohammadi
Ph.D. student, Mechanical Engineering of Biosystems, University of Tehran, Iran