Simulation of hot runner system effect on injection molding process in compare with cold runner
عنوان مقاله: Simulation of hot runner system effect on injection molding process in compare with cold runner
شناسه ملی مقاله: PPSRC2011_108
منتشر شده در کنفرانس بین المللی فرآورش پلیمرها در سال 1390
شناسه ملی مقاله: PPSRC2011_108
منتشر شده در کنفرانس بین المللی فرآورش پلیمرها در سال 1390
مشخصات نویسندگان مقاله:
Mahdi Massah - Department of Chemical Engineering, Faculty of Engineering,Arak University
Mostafa Keshavarz Moraveji
خلاصه مقاله:
Mahdi Massah - Department of Chemical Engineering, Faculty of Engineering,Arak University
Mostafa Keshavarz Moraveji
The role of Hot runner system in quality and cost reduction is very important in plastic parts that produced by injection molding process and computer simulation software have had success in predicting effect of hot runner system in compare with cold runner system. A two cavity CAD file design and import in Moldflow software that used a hybrid of finite difference / boundary element solution. Significant reduction in time and cost consumption can be interested reason (or point) to use of numerical method software instead of experimentally experiences. In the studies acrylonitrile butadiene styrene was used as base polymer. Cooling and runner system were designed in real conditions. Results of simulate were plotted as a safe molding area for hot and cold runner system in specific variations of injection molding parameters. The results have a good accordance with the experimentally report and decrease of pressure was seen in hot runner system in compare with cold runner system.
کلمات کلیدی: Polymer, Injection Molding, Runner System, Numerical Simulation
صفحه اختصاصی مقاله و دریافت فایل کامل: https://civilica.com/doc/134003/