Macroscopic behavior of Polymer Foams based Micromechanics Using Finite Element Method

Publish Year: 1390
نوع سند: مقاله کنفرانسی
زبان: English
View: 958

متن کامل این Paper منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل Paper (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.

  • Certificate
  • من نویسنده این مقاله هستم

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این Paper:

شناسه ملی سند علمی:

PPSRC2011_129

تاریخ نمایه سازی: 30 بهمن 1390

Abstract:

Polymer foams commonly employ in the sporting, transport and building industries for weight reduction and passive safety applications, due to their light weight, good energy absorption capability and low cost of manufacture. In this paper, a 3D finite element model is developed to analyze the behavior of polymer foams. The present paper is most importantly aimed to evaluate macroscopic mechanical behavior starting from a micro-structural approach (Kelvin cell) for particular polymeric foam. The global macroscopic model (Polymeric foam block numerical model) is obtained replicating the unit cell in all the space directions. The commercial finite element software ABAQUS® is used for the Finite Element analysis. Further on, the numericalmodel is also validated using the Gibson Model and the experimental results as well. In addition, the influence of the cavity size on stress-strain behavior of foam is investigated

Authors

Abdolhossein Fereidoon

Faculty of Mechanical Engineering, Semnan University, Semnan, Iran

Seyed Ali Taheri

Department of Mechanical Engineering, Islamic Azad University, Semnan Branch, Iran

مراجع و منابع این Paper:

لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :
  • W. Thomson, L. Kelvin. Philosophical Magazine (5th series), 24; 1887; ...
  • L. Gibson, F. Ashby. Cellular solids. Structures and properties. Cambridge ...
  • A.M. Kraynik, M.K. Neilsen, D.A. Reinelt, W.E. Warren. Foam _ ...
  • X. Roy, L. Gao, K. Li. Mic romechanica l Modeling ...
  • ABAQUS 6.9. User's manual Dassault Systems Corp, RI, USA. 2009. ...
  • G. venkatach alam, Micro -mechanics of Foam. J AS 89, ...
  • W. Jang, M. Kraynik, S. Kyriakides, on the microstructure of ...
  • M. Avalle, G. Belingardi. Mechanical models of cellular solids, parameters ...
  • R. Bouix, P. Viot, J. Lataillade. Polypropylene foam behavior under ...
  • Proceedings of the Polymer Processing Society Asia/Australia Regional Meeting - ...
  • نمایش کامل مراجع