Preparation and characterization of polyvinylchloride/thermoplastic polyurethane blend membranes
Publish Year: 1390
نوع سند: مقاله کنفرانسی
زبان: English
View: 1,333
متن کامل این Paper منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل Paper (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
PPSRC2011_219
تاریخ نمایه سازی: 30 بهمن 1390
Abstract:
Porous membranes were prepared by non-solvent induced phase inversion from miscible blends of polyvinylchloride and thermoplastic polyurethane. Pure water flux measurement showed that addition of TPU to PVC results in reduction of the operating pressure of the membranes compared to pure PVC membranes with best properties obtainable at a blend composition of 75:25 (PVC:TPU). The performance of blend membranes was examined in the removal of Coomassie Brilliant Blue G-250 dye with a molecular weight of 854.02 g/mol from its aqueous solutions. Results indicated that the prepared membranes are even capable of 100% dye rejection with potential application as nanofiltration membranes
Keywords:
Authors
Zahra Maghsoud
Polymer Engineering Group, Faculty of Chemical Engineering, Tarbiat Modares University, P.O.Box: ۱۴۱۱۵/۱۴۳, Tehran, Iran
M. H. Navid Famili
Polymer Engineering Group, Faculty of Chemical Engineering, Tarbiat Modares University, P.O.Box: ۱۴۱۱۵/۱۴۳, Tehran, Iran
Sayed Siavash Madaeni
Membrane Research Center, Chemical Engineering Department,Razi University, Kermanshah, Iran
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :