M.R Yazdani Sarvestani - Department of Polymer Engineering, Mahshahr Branch, Amir Kabir University of Technology, Mahshahr, Iran
A Arefazar - Department of Polymer Engineering and Color Technology, Amir Kabir University of Technology, Tehran, Iran
O Moini Jazani - Department of Polymer Engineering and Color Technology, Amir Kabir University of Technology, Tehran, Iran
M.R Saeb - Department of Polymer Engineering, Mahshahr Branch, Islamic Azad University, Mahshahr

The work deals with compatibilization of polyamide-6 (PA-6)/polycarbonate (PC) systems by using maleated poly [styrene-b-(ethylene-co-butylene)-b-styrene] triblock copolymer (SEBSg- MA). In particular, the interset was to study the role of such compatibilizer toward morphology and mechanical properties of the incompatible polymer blends of PA-6/PC. Here, incorporation of reactive SEBS-g-MA and unfunctionalized SEBS, namely reactive compatibizing system, has been found to provide significant improvement toward mechanical properties of the PA-6/PC blends. In addition, scanning electron microscopy (SEM) studies showed that the encapsulation of SEBS around the PC domains becomes gradually incomplete while using SEBS-g-MA and unfunctionalized SEBS, simultaneously, throughout the PA-6 rich phase. Also, the SEBS dispersed domains within the PA-6 matrix progressed with increasing the ratio of unfunctionalized SEBS to SEBS-g-MA. However the encapsulation was incomplete, maximum impact strength and maximum strain at break in tensile test were achieved when certain weight ratio of SEBS-g-MA to SEBS were employed.

Reactive compatibilization; polyamide-6/Polycarbonate Blends; Maleated SEBS