Direct Reduced Iron an Advantageous Charge Material for Induction Furnaces

Industrial and experimental induction furnaces are used for melting various types of iron ingots, returned scraps and DRI sponge pellets to produce high purity cast - iron and steel heats. The lowest consumption of electrical energy determined for continuous feeding operation is ۰.۳ KWH/Kg for the production of cast - iron in a ۱.۵ - ton industrial furnace and ۰.۴۵ KWH/Kg for the production of steel in a ۲۵- Kg experimental furnace. The optimum feeding rate for lowest energy consumption is ۱۲.۵ grams per second for continuous feeding of DRI in a ۲۵ - Kg induction furnace. Similar measurements show that the optimum size of the DRI pellets is around ۷ milimeters.

Authors

S.K. Sadrnezhaad

Materials Science and Engineering, Sharif University of Technology

Certificate
من نویسنده این مقاله هستم

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این Paper:

https://civilica.com/doc/1392365

شناسه ملی سند علمی:

JR_IJE-3-1_005

تاریخ نمایه سازی: 18 بهمن 1400

How to Cite to This Paper:

If you want to refer to this Paper in your research work, you can simply use the following phrase in the resources section:

Sadrnezhaad, S.K.,1369,Direct Reduced Iron an Advantageous Charge Material for Induction Furnaces,https://civilica.com/doc/1392365

Scientometrics

The specifications of the publisher center of this Paper are as follows:

Ranking of Sharif University of Technology

Type of center: دانشگاه دولتی

Paper count: 16,512

In the scientometrics section of CIVILICA, you can see the scientific ranking of the Iranian academic and research centers based on the statistics of indexed articles.