Structural Evaluation of Repair Methods on Dented Tubular Members Used in Jacket Platforms

Publish Year: 1400
نوع سند: مقاله ژورنالی
زبان: English
View: 54

This Paper With 11 Page And PDF Format Ready To Download

  • Certificate
  • من نویسنده این مقاله هستم

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این Paper:

شناسه ملی سند علمی:

JR_IJMTE-15-1_010

تاریخ نمایه سازی: 23 بهمن 1400

Abstract:

Today, Iran's oil and gas industry requires maintenance, repair, renovation, and reconstruction methods for the existing platforms. It is essential to discuss the repair of offshore platforms since they mostly have been in service beyond their design lives and subjected to damages mentioned in the following. Furthermore, offshore platforms' increased number and service lives add to the need for the in-situ repair of offshore platforms. The most important reasons for the structural repair of offshore platforms include corrosion, fatigue, the collision of floating objects (e.g., vessels), the fall of heavy objects, and intensive storms. By considering the dent damage of platform members, which typically arise from the fall of heavy objects and the collision of floating objects, the present study investigates the damages resulting from such incidents during the operation of platforms and proposes the required repair methods. The repair methods include grouting, member replacement, mechanical clamps, and doubler plates. Once the experimental model of a dent-damaged member was validated, the repair methods were applied to the models, examining the strength of the members. The results indicated that the member strength reduced by up to nearly ۴۰% at a dent depth as large as ۰.۳ of the member diameter (d=۰.۳D). However, the reduced strength could be compensated from ۱۲% to about ۱۲۵%, by applying the repair methods.

Authors

Seyed Mohammad Hossein Sharifi

Mechanical Engineering Department, Petroleum University of Technology

Abdolrahim Taheri

Mechanical Engineering Department, Petroleum University of Technology

Ehsan Karimi Pur

Mechanical Engineering Department, Petroleum University of Technology

مراجع و منابع این Paper:

لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :
  • C. S. Smith, W. L. Somerville, J. W. Swan, and ...
  • J. A. Padula, A. Ostapenko, and others, "A load-indentation relationship ...
  • J. Taby and T. Moan, "Collapse and residual strength of ...
  • J. R. MacIntyre, "An analytical study of damaged tubular member ...
  • L. Duan, J. T. Loh, and W.-F. Chen, "Moment-curvature relationships ...
  • C. P. Ellinas, "Ultimate strength of damaged tubular bracing members," ...
  • J. M. Ricles, W. B. Lamport, T. E. Gillum, and ...
  • J. M. Ricles, T. E. Gillum, W. B. Lamport, and ...
  • J. K. Paik, J. M. Lee, and D. H. Lee, ...
  • S. Parsanejad, "Strength of grout-filled damaged tubular members," Journal of ...
  • Y. Ueda and S. M. H. Rashed, "Behavior of damaged ...
  • Y. H. Mugahed Amran, R. Alyousef, R. S. M. Rashid, ...
  • H. Nassiraei and P. Rezadoost, "Stress concentration factors in tubular ...
  • A. Aeran, S. C. Siriwardane, O. Mikkelsen, and I. Langen, ...
  • W. M. Bruin, "Assessment of the residual strength and repair ...
  • ASTM A۵۷۲, "Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel," ...
  • Nassiraei, H. (۲۰۱۹). Static strength of tubular T/Y-joints reinforced with ...
  • Nassiraei, H., Zhu, L., & Gu, C. (۲۰۲۱). Static capacity ...
  • Nassiraei, H., & Rezadoost, P. (۲۰۲۱). Static capacity of tubular ...