Morphological Characterization of Combustion Deposited Diamond Crystals and Films
عنوان مقاله: Morphological Characterization of Combustion Deposited Diamond Crystals and Films
شناسه ملی مقاله: JR_IJE-15-8_007
منتشر شده در Volume ۱۵, Issue ۳, TRANSACTIONS B: Application در سال 1381
شناسه ملی مقاله: JR_IJE-15-8_007
منتشر شده در Volume ۱۵, Issue ۳, TRANSACTIONS B: Application در سال 1381
مشخصات نویسندگان مقاله:
H. R. Habibi Bajguirani - , National Iranian Steel Company (NISCO)
M. A. Golozar - Materials Engineering, Isfahan University of Technology
خلاصه مقاله:
H. R. Habibi Bajguirani - , National Iranian Steel Company (NISCO)
M. A. Golozar - Materials Engineering, Isfahan University of Technology
Single crystals and polycrystalline diamond films of several thicknesses were deposited using oxygen/acetylene combustion flame technique. The substrate used was pure polycrystalline molybdenum subjected to mechanical polishing. Quality and microstructural characteristic of diamond produced were investigated using X-Ray diffraction, Raman Spectroscopy, Scanning and Transmission Electron Microscopy. Results obtained revealed that a good quality single and polycrystalline diamond could be produced. However, a combination of various defects such as twins, dislocations and stacking faults are always present.
کلمات کلیدی: morphology, Diamond, Like Carbon (DLC), Combustion Flame Technique, Scanning electron microscopy (SEM), Transmission Electron Microscopy (TEM), X, Ray Diffraction (XRD), Raman spectroscopy
صفحه اختصاصی مقاله و دریافت فایل کامل: https://civilica.com/doc/1415771/