CIVILICA We Respect the Science
(ناشر تخصصی کنفرانسهای کشور / شماره مجوز انتشارات از وزارت فرهنگ و ارشاد اسلامی: ۸۹۷۱)

Effect of GDI Injector direction and location on tumble flow and piston wall film

عنوان مقاله: Effect of GDI Injector direction and location on tumble flow and piston wall film
شناسه ملی مقاله: ICICE12_021
منتشر شده در دوازدهمین همایش بین المللی موتورهای درونسوز و نفت در سال 1401
مشخصات نویسندگان مقاله:

Saeid Shirvani - Iran Khodro Powertrain Company
Arash Mohammadi - Faculty of Mechanical Engineering Department, Shahid Rajaee Teacher Training university
Sasan Shirvani - K.N. Toosi University of Technology
Mohsen Mohsenirad - Iran Khodro Powertrain Company
Ali Asef - Iran Khodro Powertrain Company

خلاصه مقاله:
In the current study, a ۳D-CFD model was developed with the aim of revealing the spray evolution in the EF۷ engine when a direct injector is numerically implemented in the combustion chamber. The initial conditions, boundary conditions, and the spray shape were validated at the Iran Khodro Power Train Company (IPCO). The engine was operated at the condition of wide-open throttle and ۶۰۰۰ rpm. The data was employed as the inputs of the current CFD model to predict the spray evolution within the cylinder during the injection to the ignition timing. The results revealed that the spray injection had much wall-wetting effect on the piston surface rather than the liner. Thus, optimizing the piston surface is essential if the engine uses a side-direct gasoline injector in the cylinder. The CFD results specified the Crank Angle Degrees (CADs) with high levels of tumble number, showing the appropriate injection timings for the GDI sequential injections. Furthermore, the injector direction and location effects were studied on the tumble number, Turbulent Kinetic Energy (TKE), and spray wall-wetting. The base injector direction and location showed promising results than other scenarios, meaning that the initial injector location was appropriately chosen.

کلمات کلیدی:
GDI, Injector, mixture preparation, CFD, spray modeling

صفحه اختصاصی مقاله و دریافت فایل کامل: https://civilica.com/doc/1464939/