Lelisa Regea Mengistu - Jimma Institute of Technology, Faculty of Civil and Environmental Engineering, Jimma University, Jimma, Ethiopia
Zerihun Asmelash Samue - Jimma Institute of Technology, Faculty of Civil and Environmental Engineering, Jimma University, Jimma, Ethiopia
Chali Dereje Kitila - Jimma Institute of Technology, Faculty of Civil and Environmental Engineering, Jimma University, Jimma, Ethiopia
Abreham Bekele Bayu - Corresponding author: Jimma Institute of Technology, School of Chemical Engineering, Jimma University, Jimma, Ethiopia

Background: Nowadays there is a problem related to wastewater handling which is released from different activities. Electrocoagulation has been a dominant treatment method for wastewater treatment. There are different forms of electrocoagulation methods for wastewater treatment. Nevertheless, there was no comparison made for the removal efficiency of the sono-alternate current (SAC), alternate current (AC), sono-direct current (SDC), and direct current (DC) electrocoagulation process. Methods: The efficiency of electrocoagulation method was compared for removal of color and turbidity from Jimma University domestic wastewater. Batch reactor DC/AC electrocoagulation cell was used to determine the removal efficiency. During the comparison, the response surface methodology (RSM) was used to analyze and optimize the data taken from the laboratory. In addition, ANOVA was used to analyze the interaction effects of different parameters. Results: The removal of color and turbidity from domestic wastewater was about ۹۷.۵۳% and ۹۵.۲۸% respectively, using direct current electrocoagulation (DCE). For alternate current electrocoagulation (ACE), the removal of color and turbidity was ۹۸.۳۵% and ۹۶.۱۲%, respectively. The removal of color and turbidity for sono-DCE (SDCE) was obtained to be ۹۸.۵۵% and ۹۸.۲۷%, respectively and for sono- ACE (SACE), the removal of color and turbidity was ۹۹.۹۵% and ۹۹.۷۶%, respectively at the optimum experimental conditions of chemical oxygen demand (COD) ۹۶۰ g/L, initial wastewater pH of ۶.۸, the current density of ۰.۴ A/dm۲, inter-terminal spacing of ۱ cm, and the association of electrode of Al-Al. Conclusion: According to the findings of this study, it can be concluded that, the SAC electrocoagulation method is the best and promising technique compared with all other electrocoagulation methods.

Alternating current, Direct current, Wastewater, Sono-alternate, Sono-direct, Turbidity, and color removal