Ghorban Asgari - Social Determinants of Health Research Center (SDHRC), Hamadan University of Medical Sciences Hamadan, Iran- Department of Environmental Health Engineering, School of Public Health, Hamadan University of Medical Sciences, Hamadan, Iran
Somaye Akbari - Department of Environmental Health Engineering, Faculty of Medical Sciences, Lecturer of Ghand-e- Karaj International Applied and Technology Center, Alborz, Iran

Methylene blue (MB) dye is an environmental contaminant that has been mostly used in textile industry. Taguchi orthogonal array design was employed as an optimization method to reduce the number of experiments. In this research, bone char ash modified by MgO-Fe catalyst was applied for degradation of MB in catalytic ozonation process (COP) system and operational parameters including initial MB dosages, initial pH, catalyst dose, and contact time were optimized with Taguchi method. Accordingly, the best condition for the removal of MB obtained at initial MB concentration of ۲۰ mg/L, reaction time of ۱۵ minutes, initial pH value of ۱۰, and catalyst concentration of ۰.۱ g/L. Additionally, optimization of experimental set-up showed that the MB concentration had a notable effect on MB degradation in COP process (۵۵.۶%), and reaction time had a negligible effect (۱.۹۸%). At this condition, total organic carbon (TOC) removal was determined to be ۳۱% but in longer time, its removal increased to ۶۵%.

Methylene blue, Bone char ash, MgO, Taguchi