بررسی تجربی ویژگی های ساختاری، مکانیکی و هسته ای کامپوزیت های جاذب نوترون حاوی بور

Publish Year: 1401
نوع سند: مقاله ژورنالی
زبان: Persian
View: 207

This Paper With 8 Page And PDF Format Ready To Download

  • Certificate
  • من نویسنده این مقاله هستم

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این Paper:

شناسه ملی سند علمی:

JR_JONSAT-43-4_001

تاریخ نمایه سازی: 11 مهر 1401

Abstract:

در پژوهش حاضر ویژگی های ساختاری، مکانیکی و هسته ای دو نوع کامپوزیت زمینه پلیمری و زمینه فلزی حاوی ذرات کاربید بور مورد بررسی تجربی قرار گرفت. بر اساس آزمون عبور نوترون، میزان عبور نوترون کم ­تری در پلیمر BPAER تقویت شده با نانوذرات C۴B در مقایسه با کامپوزیت تقویت شده با میکروذرات به دست آمد. نمودارهای تنش- کرنش به دست آمده از آزمون کشش، بهبود ویژگی های مکانیکی کامپوزیت رزین اپوکسی تقویت شده با نانوذرات C۴B در مقایسه با میکروذرات را نشان می دهد. هم­ چنین آزمون عبور تابش نوترون، بهبود مشخصه ی هسته ای نانوکامپوزیت C۴B-Al را در مقایسه با میکروکامپوزیت C۴B-Al نشان می دهد. از سوی دیگر مشاهده شد چگالی این نانوکامپوزیت مقدار بیش­ تری نسبت به میکروکامپوزیت داشته و صرف نظر از اندازه و مقدار افزودن ذرات کاربید، چگالی تمام نمونه های کامپوزیتی کم­ تر از آلومینیم است. با افزایش درصد فاز تقویت کننده سختی کامپوزیت نیز افزایش یافته است که این افزایش در نمونه های نانوکامپوزیت بسیار بیش­ تر از نمونه های میکرو بوده است.

Authors

محسن اسدی اسدآباد

پژوهشکده رآکتور و ایمنی هسته ای، پژوهشگاه علوم و فنون هسته ای، سازمان انرژی اتمی ایران، صندوق پستی: ۸۴۸۶-۱۱۳۶۵، تهران- ایران

محمدجواد نصر اصفهانی

دانشکده فیزیک، دانشگاه پیام نور، صندوق پستی: ۱۹۵۳۶۳۳۵۱۱، تهران- ایران

فریدون پیامی

پژوهشکده رآکتور و ایمنی هسته ای، پژوهشگاه علوم و فنون هسته ای، سازمان انرژی اتمی ایران، صندوق پستی: ۸۴۸۶-۱۱۳۶۵، تهران- ایران

مراجع و منابع این Paper:

لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :
  • R. Zboray, et al., Development of a fast neutron imaging ...
  • Y. Huang, et al., A Sandwich type of neutron shielding ...
  • I. Topcu, et al., Processing and mechanical properties of B۴C ...
  • A. Canakci, F. Arslan, Abrasive wear behaviour of B۴C particle ...
  • S.K. Tiwari, et al., Characterization of Mechanical Properties of Al-B۴C ...
  • A. Sathishkumar, et al., Investigation of mechanical properties on Al ...
  • G. Manohar, K.M. Pandey, S.R. Maity, Effect of Sintering Mechanisms ...
  • W.S. Rubink, et al., Spark plasma sintering of B۴C and ...
  • M. Dutto, et al., The effect of microwave heating on ...
  • R. Casati, M. Vedani, Metal Matrix Composites Reinforced by NanoParticles—A ...
  • T. Özdemir, et al., Neutron shielding of EPDM rubber with ...
  • J. Kim, J. Jun, M. Lee, Particle Size-Dependent Pulverization of ...
  • A.M. Sukegawa, et al., Flexible heat resistant neutron shielding resin, ...
  • K. Okuno, Neutron shielding material based on colemanite and epoxy ...
  • J.J. Park, et al., Enhancement in the microstructure and neutron ...
  • J. Kim, et al., Enhancement of thermal neutron attenuation of ...
  • P. Zhang, et al., The design, fabrication and properties of ...
  • R. Adeli, S.P. Shirmardi, S.J. Ahmadi, Neutron irradiation tests on ...
  • Z. Soltani, et al., Effect of particle size and percentages ...
  • Y. Huang, et al., A Sandwich type of neutron shielding ...
  • B. Ellis, In Chemistry and Technology of Epoxy Resins, ۱st ...
  • J.W. Krumpfer, et al., Make it nano-Keep it nano, Nanotoday, ...
  • S.D. Kaloshkin, et al., Radiation-protective polymer-matrix nanostructured composites, J. Alloys ...
  • J. Jun, et al., Enhancement of dispersion and adhesion of ...
  • K. Wang, et al., Mechanical properties and toughening mechanisms of ...
  • Sh. Fu, et al., Effects of particle size, particle/matrix interface ...
  • Y. Nakamura, et al., Effects of Particle Size on Mechanical ...
  • P. Zhang, et al., The design, fabrication and properties of ...
  • Z.G. Xu, et al., The design of a novel neutron ...
  • E. Ghasali, et al., Investigation on microstructural and mechanical properties ...
  • R.M. Mohanty, K. Balasubramanian, S.K. Seshadri, Boron carbide- reinforced aluminum ...
  • Y.K. Çelik, K. Seçilmiş, Investigation of wear behaviours of Al ...
  • S. Singh, R. Singh, Effect of process parameters on microhardness ...
  • M. Montoya-Dávila, M.A. Pech-Canul, Pech-Canul, Effect of bi- and trimodal ...
  • N.J. Petch, The cleavage strength of polycrystals, J. Iron. Steel ...
  • نمایش کامل مراجع