Application of a Novel Optimization Algorithm in Design of Lead Rubber Bearing Isolation Systems for Seismic Rehabilitation of Building Structures

Publish Year: 1402
نوع سند: مقاله ژورنالی
زبان: English
View: 140

This Paper With 10 Page And PDF Format Ready To Download

  • Certificate
  • من نویسنده این مقاله هستم

این Paper در بخشهای موضوعی زیر دسته بندی شده است:

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این Paper:

شناسه ملی سند علمی:

JR_IJE-36-3_020

تاریخ نمایه سازی: 16 اسفند 1401

Abstract:

Various mechanical and geometrical parameters have different effects on the isolation system's performance. Thus, a sensitivity study of the isolated structures' behavior is an essential matter. In this regard, the isolation systems should be designed using optimization approaches to consider the effects of the different factors. In this study, the optimal design of the lead rubber bearing (LRB) seismic isolation was conducted by considering mass irregularity and near-fault seismic excitation effects. Also, sensitivity analysis of the behavior of the considered isolated buildings was implemented concerning the mechanical parameters of the LRB system. A nonlinear time history dynamic analysis was used here, and the design optimization of the LRB isolator was programmed using the newly introduced grasshopper optimization algorithm (GOA). The main purpose was to investigate the ability of the GOA to optimize the design parameters of the LRB-isolated frames. The results proved the desirable ability of the GOA to solve optimal design problems for isolation systems. Also, the sensitivity analysis of the seismic behavior of LRB base-isolated structures showed that the yield base shear index had the most important effects. Also, the mass irregularity parameter showed a negligible influence.

Keywords:

Authors

F. Mehri

Department of Civil Engineering, University of Bonab, Bonab, East Azerbaijan, Iran

S. Mollaei

Department of Civil Engineering, University of Bonab, Bonab, East Azerbaijan, Iran

E. Noroozinejad Farsangi

Faculty of Civil and Surveying Engineering, Graduate University of Advanced Technology, Kerman, Iran

M. Babaei

Department of Civil Engineering, University of Bonab, Bonab, East Azerbaijan, Iran

F. Ghahramani

Department of Civil Engineering, Urmia University, Urmia, Iran

مراجع و منابع این Paper:

لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :
  • Spencer Jr, B. and Soong, T., "New applications and development ...
  • Farsangi, E.N., Takewaki, I., Yang, T.Y., Astaneh-Asl, A. and Gardoni, ...
  • Pal, S., Roy, B. and Choudhury, S., "Comparative performance study ...
  • Matsagar, V.A. and Jangid, R., "Influence of isolator characteristics on ...
  • Spyrakos, C., Koutromanos, I. and Maniatakis, C.A., "Seismic response of ...
  • El-Bayoumi, K., Naguib, M. and Salem, F.A., "Dynamic analysis of ...
  • Tena-Colunga, A. and Zambrana-Rojas, C., "Dynamic torsional amplifications of base-isolated ...
  • Danesh, M., "Evaluation of seismic performance of pbd optimized steel ...
  • Saremi, S., Mirjalili, S. and Lewis, A., "Grasshopper optimisation algorithm: ...
  • Naeim, F. and Kelly, J.M., "Design of seismic isolated structures: ...
  • Code, I.H.G.D., "Vice presidency for strategic planning and supervision", Tehran, ...
  • نمایش کامل مراجع