Study on Multi-flow Field Characteristics of Unloading Groove Spacing of Bidirectional Gear Pump
Publish place: Journal of Applied Fluid Mechanics، Vol: 16، Issue: 5
Publish Year: 1402
نوع سند: مقاله ژورنالی
زبان: English
View: 108
This Paper With 11 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JAFM-16-5_015
تاریخ نمایه سازی: 20 اسفند 1401
Abstract:
Improving the output flow quality of the high-precision micro bidirectional gear pump can effectively improve the position control accuracy and dynamic characteristics of the electro-hydraulic actuator. In order to meet the appeal requirements and reduce the vibration and noise of the gear pump and prolong its working life, this paper starts with the research of the key part of the gear pump–the unloading groove structure. The three characteristics of trapped oil phenomenon, cavitation phenomenon, and flow were used as key indices to evaluate gear pump performance. Using numerical simulation analysis, the dynamic grid simulation method was used to explore the influence of unloading groove spacing on the transient multi-flow field characteristics of the gear pump under conventional design range. Our results show that reducing the distance between unloading grooves can greatly reduce the trapped oil pressure and the amount of gas precipitation in the flow field, while reducing flow pulsation and improving volumetric efficiency. However, when the unloading groove spacing is too small, the instantaneous flow curve loses the pulsation characteristics and the flow stability decreases. Considering the influence of the gear pump on the accuracy of the electro-hydraulic actuator and the performance of the gear pump itself, the analytic hierarchy process was used to obtain the ۱ mm unloading slot spacing, which best meets the engineering requirements of high flow accuracy and low vibration noise. The results provide a basis for work on the structural optimization of high-precision micro gear pumps.
Keywords:
Authors
H. Zhang
School of Mechanical Engineering, Dalian University of Technology, Dalian, Liaoning Province, ۱۱۶۰۲۴, China
D. Y. Zhan
School of Mechanical Engineering, Dalian University of Technology, Dalian, Liaoning Province, ۱۱۶۰۲۴, China
R. Q. Tian
School of Mechanical Engineering, Dalian University of Technology, Dalian, Liaoning Province, ۱۱۶۰۲۴, China
T. A. Zhang
School of Mechanical Engineering, Dalian University of Technology, Dalian, Liaoning Province, ۱۱۶۰۲۴, China
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :