In-situ Iron aluminide-Alumina Nanostructured Cermet Prepared by Mechanochemical Process
Publish place: 2nd International Congress on Nanoscience and Nanotechnology
Publish Year: 1387
نوع سند: مقاله کنفرانسی
زبان: English
View: 859
متن کامل این Paper منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل Paper (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICNN02_332
تاریخ نمایه سازی: 27 شهریور 1391
Abstract:
High energy ball milling has been recognized as an effective way of producing nanocrystalline, amorphous, and other non-equilibrium structures mainly through a solid state reaction. An important characteristic of such phases is that they exhibit properties and performance much improved over their conventional course-grained counterparts. Chemical reactions induced by mechanical treatment, i.e. mechanochemical synthesis, are known to be very effective for preparing nanocomposite powders with more than two phases [1]. Fabrication of iron aluminides-alumina cermets was done by presureless sintering of iron aluminides and alumina powder mixture [2], and it was revealed that addition of alumina particles to the iron aluminides lead to poor interfacial bonding between two phases. Furthermore, hot pressing of iron aluminides with Al2O3 nanopowder [3] also resulted in sever agglomeration of alumina phase during sintering. According to the literature, the in-situ formation of two phases in a composite structure could overcome the incompatibility of iron aluminides and alumina phases. In this study, Fe3Al-Al2O3 nanocomposite powder was synthesized by mechanochemical reaction of Fe2O3 and Al powder mixtures. Details of processing steps, phase transformation, microstructural characterization, and sintering behavior are investigated
Authors
M Khodaei
Department of Materials Engineering, Isfahan University of Technology, ۸۴۱۵۶-۸۳۱۱۱, Iran
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :