investigation of current pressure and time effect on mechanical properties of aluminum alloy 2024 welding bead through designing of test by taguchi method
Publish Year: 1388
نوع سند: مقاله کنفرانسی
زبان: English
View: 1,150
This Paper With 5 Page And PDF Format Ready To Download
- Certificate
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
IIWC01_016
تاریخ نمایه سازی: 6 مهر 1391
Abstract:
to prevent weld cross -section from corrosion and not to use of weld metal for capsule and fuel reservoirs production which are applied in aeronautical industry method of resistance seam welding is used for welding of various aluminum alloys .correct selection of passing time and pressure gradient between jaws which are considered as parameters of the process is very effective in production of desirable welding bead in this study 2024-T6 aluminum alloys sheets with thickness of 1.6mm have been welded by various levels of the mentioned parameters for decreasing time and costs and also for attaining to better result taguchi design of experiment method has been used. so effect of each parameter on mechanical properties such as tensile strength and micro hardness of welding bead has been studied in 3 levels moreover some studies on microstructure of weld region were accomplished.
Keywords:
Authors
مراجع و منابع این Paper:
لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :