Samira Mohammadyzadeh - Graduated MS Student, Department of Structural Engineering, University of Tabriz, ۲۹ Bahman Blvd., Tabriz, Iran. E-mail: s.mohammadyzadeh@gmail.com
Alireza Mojtahedi - Associated Professor, Department of Water Resources Engineering, University of Tabriz, ۲۹ Bahman Blvd., Tabriz, Iran, (corresponding author), E-mail: a.mojtahed@tabrizu.ac.ir
Javad Katebi - Associated Professor, Department of Structural Engineering, University of Tabriz, ۲۹ Bahman Blvd., Tabriz, Iran, E-mail: jkatebi@tabrizu.ac.ir
Hamid Hokmabady - Postdoctoral Research Assistant, Department of Water Resources Engineering, University of Tabriz, ۲۹ Bahman Blvd., Tabriz, Iran. E-mail: h.hokmabady@tabrizu.ac.ir
Farhad Hosseinlou - Assistant Professor, Faculty of civil engineering and architecture, Shahid Chamran University of Ahvaz

In this study, a semi-active control system is assessed over a numerically updated model to achieve the most promising numerical results and to keep the performance of the numerical model as close to the prototype behavior as possible. Numerical model updating is performed based on the experimentally captured non-contact sensing data considering uncertainties. The elastic modulus of the jacket elements is specified as the calibration parameter. A mathematical function -optimized using Particle Swarm Optimization (PSO) algorithm- is also employed to reduce the structural uncertainties of the numerical model. Eight MR dampers both in X and Y directions are located in a platform numerical model. Modified Newmark-Beta method besides optimized parameters of instantaneous optimal control algorithm are utilized to predict the response of the system. The performance of the updated model is evaluated under environmental loads. The results indicate the importance of model uncertainty reduction in improving the accuracy of simulation results in a complex system. Based on the results using a non-contact sensing technology such as Laser Doppler Vibrometer (LDV) system is strongly recommended in practical cases due to great sensitivity capabilities and also no direct contact requirements.

Numerical Model Updating, Laser Doppler Vibrometer (LDV), Offshore Structure, Semi-Active Control, MR damper