The influence of TiO۲ and Na۲CO۳ on the viscosity and crystallization behavior of mold powders

Publish Year: 1390
نوع سند: مقاله ژورنالی
زبان: English
View: 48

This Paper With 7 Page And PDF Format Ready To Download

  • Certificate
  • من نویسنده این مقاله هستم

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این Paper:

شناسه ملی سند علمی:

JR_ISSIRAN-8-1_002

تاریخ نمایه سازی: 6 آبان 1402

Abstract:

Mold powders are fluxing agents used as raw materials in the steel industry, which play very important role in processing stability and final surface quality of a product. Surface quality depends particularly on the viscosity and the heat transfer of infiltrated mold flux between the mold wall and the solidified steel shell. Heat flux across the interfacial gap depends on thermal properties of slag layer and its thickness, which is affected by slag properties such as melting, crystallization behavior, and temperature-dependent viscosity. Among all of the components of these powders, fluorine mainly controls the viscosity, solidification temperature and crystallization behavior of mold flux films. However, the volatilization and acidification of the fluoride is a significant health hazard and causes environmental pollution and intensifies the erosion to continuous caster. In this study, TiO۲ is used as a substitution to fluorine in commercial start flux. The substitution possibility was examined by measuring the viscosity and crystallization behavior, when it was compared with the properties of industrial powder. In present study, devitrification has been investigated by DTA non-isothermal experiments. It has been shown that titanium dioxide tends to increase crystallization temperature with increasing the formation of perovskite crystalline phase and this causes a decrease in heat flux between the strand and the copper mold. On the other hand, slag viscosity was decreased with increasing titanium dioxide and Na۲CO۳ content. Further XRD characterizations have provided a similar fraction of crystalline phases through Riaz method in the industrial powder and low fluorine sample with ۸wt% TiO۲.

Authors

S. Soltan Attar

Department of Materials Engineering, Isfahan University of Technology, ۸۴۱۵۶۸۳۱۱۱, Isfahan, Iran.

A. Monshi

Department of Materials Engineering, Isfahan University of Technology, ۸۴۱۵۶۸۳۱۱۱, Isfahan, Iran.

M. Meratian

Department of Materials Engineering, Isfahan University of Technology, ۸۴۱۵۶۸۳۱۱۱, Isfahan, Iran.

مراجع و منابع این Paper:

لیست زیر مراجع و منابع استفاده شده در این Paper را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود Paper لینک شده اند :
  • R.W. Soares, M.V.A. Fonseca, R. Neuman, V.J ...
  • Menezes, A.O. Lavinas and J. Dweck: Thermochim ...
  • Acta, ۳۱۸ (۱۹۹۸), ۱۳۱ ...
  • Y. Meng and B.G. Thomas: Metall. Mater. Trans ...
  • B, ۳۴(۲۰۰۳), ۷۰۷ ...
  • X. Qi, G.H. Wen and P. Tang, J. Non-Cryst. Solids.,۳۵۴ ...
  • G. Wen, S. Sridhar, P. Tang, X. Qi and Y. ...
  • A.B. Fox, K.C. Mills, D. Lever, C. Bezerra,C. Valadares, I. ...
  • N.C. Machingawuta, S. Bagha and P. Grieveson:Steelmaking Conference Proceedings, Washington,D.C., ...
  • T. Cimarelli: Metall. Ital. Italy, ۸۹(۱۹۹۷), ۳۱ ...
  • K.C. Mills, S. Sridhar, A.S. Normanton and S.T ...
  • Mallaband: The Brimacombe Memorial Symposium,Vancouver, (۲۰۰۰), ۷۸۱ ...
  • J. Cho, H. Shibata, T. Emi and M. Suzuki: ISIJ ...
  • ۳۸(۱۹۹۸), ۴۴۰ ...
  • K.W. Yi, Y.T. Kim and D.Y. Kim, Met. Mater. Int ...
  • ,۱۳ (۲۰۰۷), ۲۲۳ ...
  • S.Y. Choi, D.H. Lee, D.W. Shin, J.W. Choand J.M. Park: ...
  • A. Yamauchi, K. Sorimachi and T. Yamauchi:Ironmak. Steelmak., ۲۹(۲۰۰۲), ۲۰۳ ...
  • D.T. Stone and B.G. Thomas: CanadianMetallurgical Quarterly, Netherlands, ۳۸(۱۹۹۹), ۳۶۳ ...
  • R. Carli and C. Righi:۷thInternational Conferenceon Molten Slags Fluxes and ...
  • K.C. Mills, A.B. Fox, R.P. Thackray and Z. Li:۷thInternational Conference ...
  • R. Taylor and K.C. Mills: Ironmak. Steelmak. ۱۵(۱۹۸۸), ۱۸۷ ...
  • T. Watanabe, H. Fukuyama and K. Nagata, ISIJInt., ۴۲ (۲۰۰۲), ...
  • C. Righi, R. Carli and V. Ghilardi: Proceedings۶th International Conference ...
  • M.L. Koul, S. Sankaranarayanan, D. Apelian andW.L. McCaulery, Press of ...
  • K.C. Mills, L. Courtney, A.B. Fox, B. Harris, Z ...
  • Idoyaga and M.J. Richardson: Thermochim. Acta, ۳۹۱(۲۰۰۲), ۱۷۵ ...
  • نمایش کامل مراجع