Faramarz Doulati Arde Jani - Tehran University
Khashaiar Badii - School of Engineering, Deakin University, Waurn Ponds, VIC ۳۲۱۶, Australia

The adsorption steps of Direct Red ۸۰ (DR ۸۰) and Direct Red ۸۱ (DR ۸۱) dyes from a synthetic aqueous solution were investigated using diatomite as a low cost, abundant and naturally available adsorbent. The equilibrium and kinetics studies were first carried out. The effects of pH, contact time, temperature, initial concentration, calcinations and sorbent dose on the adsorption process were conducted in order to obtain the maximum dyes removal. The highest adsorption was obtained at pH ۲. The maximum adsorption of DR ۸۰ and DR ۸۱ dyes onto diatomite were ۹۰.۱۹ and ۹۳.۰۸ % respectively. It was further found that both investigated steps of adsorption including diffusion and adsorption on surfaces are important. However, the size of dye molecule is more effective, especially, on the adsorption capacity. It means that diffusion through the micro-pores is the most important step of the adsorption mechanism and adsorption on the adsorbent surfaces has the second place of significance.

Adsorption, diatomite, adsorption steps, diffusion through pores, Direct Red ۸۰ and Direct Red ۸۱ dyes